How to Set Up a Wireless Mouse on a Laptop
To set up a wireless mouse on a laptop, insert a battery if the mouse needs one, plug the USB receiver into a USB port or pair over Bluetooth, switch the mouse on, and check that the cursor moves. The four mice below connect by LIGHTSPEED, HyperSpeed or Bluetooth, so the steps match the connection your mouse uses.
Insert the battery or charge the mouse
Put a battery in the mouse if it takes one: the G305 runs on 1 AA battery, the Orochi V2 takes a single AA or AAA battery, and the Basilisk V3 X includes an AA battery. Check the battery compartment for the correct direction, and keep a spare battery nearby. A mouse with a low battery may stutter or drop out, so start with a fresh battery.
Plug in the receiver
Plug the USB receiver into a free USB port on the laptop, and keep it close to the mouse. The G305 stores its nano receiver inside the mouse, so pull it out before you plug it in. The G502, the Orochi V2 and the Basilisk V3 X also connect through a wireless receiver, while the Orochi V2 and the Basilisk V3 X can switch to Bluetooth instead. Give the laptop a moment to recognize the receiver.
Pair over Bluetooth instead
If your mouse supports Bluetooth, you can pair it without the receiver. The Orochi V2 and the Basilisk V3 X both connect by HyperSpeed or Bluetooth, so switch the mouse to Bluetooth mode and open the laptop's Bluetooth settings. Choose the mouse from the list of devices and confirm the pairing. Bluetooth gives longer battery life: the Orochi V2 runs up to 950 hours on Bluetooth, and the Basilisk V3 X runs up to 535 hours.
Switch the mouse on and check the cursor
Switch the mouse on with its power switch and move it to check that the cursor follows. Click both buttons and roll the scroll wheel to confirm they work. If the cursor does not move, check that the receiver is seated, the mouse is switched on, and the battery is fresh. The G305 has 6 programmable buttons, the G502 has 11, and the Basilisk V3 X has 9, so check the maker's software if you want to change what a button does.
Adjust sensitivity and keep the battery fresh
Set the sensitivity in the maker's software or the laptop's mouse settings until the cursor speed feels right. The G305 reaches 12,000 DPI, the G502 reaches 25,600 DPI, and the Orochi V2 and the Basilisk V3 X reach 18,000 DPI. Store the receiver in the mouse when you travel, and keep a spare battery in the laptop bag. The G305 runs up to 250 hours on 1 AA battery, so check the battery when the mouse starts to lag.
What you need

Logitech G305 LIGHTSPEED Wireless Gaming Mouse
A LIGHTSPEED wireless mouse with a HERO 12K sensor, 12,000 DPI, 6 programmable buttons and 250 hours on 1 AA battery.
View on Amazon
Logitech G502 LIGHTSPEED Wireless Gaming Mouse
A LIGHTSPEED wireless mouse with a HERO 25K sensor, 25,600 DPI, 11 programmable buttons and adjustable weights.
View on Amazon
Razer Orochi V2 Wireless Gaming Mouse
A wireless mouse with HyperSpeed and Bluetooth, an 18K DPI sensor and up to 950 hours of battery on Bluetooth.
View on Amazon
Razer Basilisk V3 X HyperSpeed Customizable Wireless Gaming Mouse
A wireless mouse with HyperSpeed and Bluetooth, an 18K optical sensor, 9 programmable controls and up to 285 hours of battery.
View on AmazonThese come from our ranked list Best Wireless Mouse, which compares them spec by spec.
FAQ
Do I need the receiver if the mouse has Bluetooth?
No, if the mouse supports Bluetooth you can pair it without the receiver. The Orochi V2 and the Basilisk V3 X both connect by HyperSpeed or Bluetooth, so choose Bluetooth in the laptop's settings and pair the mouse there. Keep the receiver stored in the mouse for travel.
Why does my wireless mouse keep disconnecting?
Check the battery first, since a low battery can drop the connection. The G305 runs up to 250 hours on 1 AA battery, and the Orochi V2 runs up to 950 hours on Bluetooth. Also check that the receiver is seated and close to the mouse, and that the mouse is switched on.
How do I change what the mouse buttons do?
Use the maker's software to reassign buttons. The G305 has 6 programmable buttons, the G502 has 11 programmable buttons, and the Basilisk V3 X has 9 programmable controls. The G305 uses Logitech G HUB software, which also switches the mouse to Endurance mode for up to 9 months of battery life.



