Amazon Black Friday Week deals

Paid link

Monitors · How-to guide

How to Set Up a PC and Monitor

We earn a commission when you buy through our links, at no extra cost to you. As an Amazon Associate I earn from qualifying purchases.
Short answer

Setting up a PC and monitor takes a few steps: place the monitor, connect the video cable, plug in the power, then set the resolution and refresh rate. A monitor connects to a PC through HDMI or DisplayPort, and the cable must match a port on both ends. The four monitors below connect over HDMI, and two of them also have DisplayPort.

  1. Place the monitor on the desk

    Set the monitor on a stable desk with the screen facing you straight on. The Dell 24 Monitor and the Dell 27 240Hz Gaming Monitor tilt, so set the tilt so the screen faces you from your chair. Leave room behind the monitor for the video cable and the power cable, and keep the screen out of direct light.

  2. Connect the video cable

    Match the cable to a port on the monitor and a matching port on the PC. All four monitors have HDMI, and the Dell 27 240Hz Gaming Monitor and the Sceptre Prime also have DisplayPort. Plug one end into the monitor and the other end into the PC, then check that the cable sits firmly in both ports. If the screen stays blank, check that the monitor is set to the input you plugged the cable into.

  3. Plug in the power and turn it on

    Plug the monitor's power cable into a wall outlet, then plug the PC's power cable in the same way. Press the power button on the monitor, then press the power button on the PC. The monitor should show the PC's picture once the PC starts. If nothing appears, check that both power cables are firmly plugged in and that the video cable is in the right port.

  4. Set the resolution and refresh rate

    Open the display settings on the PC and set the resolution to 1920x1080, which is the resolution of all four monitors. Then set the refresh rate to the rate your monitor lists: 144Hz on the Dell 24 Monitor, 240Hz on the Dell 27 240Hz Gaming Monitor, 120Hz on the Acer KB242Y G0bi and 100Hz on the Sceptre Prime. If the picture looks wrong, check that the cable and the PC port support the rate you picked.

What you need

Dell 24 Monitor SE2426H

Dell 24 Monitor SE2426H

A 23.8-inch 1920x1080 IPS monitor with a 144Hz refresh rate, AMD FreeSync, two HDMI ports and tilt.

View on Amazon
Dell 27 Gaming Monitor SE2726HG

Dell 27 Gaming Monitor SE2726HG

A 27-inch 1920x1080 IPS monitor with a 240Hz refresh rate, FreeSync Premium, two HDMI ports and DisplayPort 1.4.

View on Amazon
Acer 23.8-inch Office Monitor KB242Y G0bi

Acer 23.8-inch Office Monitor KB242Y G0bi

A 23.8-inch 1920x1080 IPS monitor with a 120Hz refresh rate, HDMI and VGA ports, Adaptive-Sync and a VESA mount.

View on Amazon
Sceptre 24-inch Gaming Monitor 1ms E248W-FW100T

Sceptre 24-inch Gaming Monitor 1ms E248W-FW100T

A 24-inch 1920x1080 monitor with a 100Hz refresh rate, DisplayPort and two HDMI ports, built-in speakers and 100% sRGB.

View on Amazon

These come from our ranked list Best PC with Monitor, which compares them spec by spec.

FAQ

Do I need a special cable for the monitor?

Use the cable that matches the ports on your monitor and PC. All four monitors have HDMI, and the Dell 27 240Hz Gaming Monitor and the Sceptre Prime also have DisplayPort, so pick the cable that fits the ports you have.

What resolution should I set the monitor to?

Set it to 1920x1080, which is the resolution of all four monitors. That matches the resolution the monitors list, so the picture fills the whole screen.

Can I mount the monitor on the wall?

The Acer KB242Y G0bi and the Sceptre Prime are VESA mountable, so they can go on a VESA wall mount. Check the mount's size against the monitor before you buy it, and follow the mount's instructions.

Ranked monitors guides