How to Connect a Power Cable to a Motherboard
To put a power cable on a motherboard, shut the PC down, unplug it, and plug the wide main power cable from the power supply into the matching socket on the board until the latch clicks. Then connect the CPU power cable near the processor socket and the graphics card cable if your card needs one. The steps below walk through each connection in order.
Shut down and unplug the PC first
Shut the PC down through the operating system, then unplug the power cord from the wall and from the power supply. Follow the maker manual for your case and board before you open anything. Touch a bare metal part of the case to discharge static, and work with dry hands in a clear space.
Connect the main power cable
Find the wide main power socket on the motherboard and check your board manual for its position. Take the matching main power cable from the power supply and line up its clip with the tab on the socket. Push it straight in until the clip locks, and give it a gentle tug to check that it is seated. A loose main cable is the most common reason a new build shows no sign of life.
Connect the CPU power cable
Find the CPU power socket near the top of the board, close to the processor socket. Take the CPU power cable from the power supply and plug it in the same way, clip to tab, until it locks. Check your board manual for the exact socket position, since it sits in a different spot on each board layout. Never force a cable that does not line up with the socket shape.
Connect the graphics card cable
If your graphics card needs its own power, plug the 12V-2x6 cable from the power supply into the connector on the card. The supplies in the gear list include a native 12V-2x6 cable, so no adapter is needed. Push the connector in fully until it sits flush, and check that the latch, if the card has one, is engaged.
Route the cables and check each connection
Route each cable behind the motherboard tray or along the case edges so cables stay clear of the fans and air can move through the case. Fully modular supplies let you connect only the cables your build needs, so leave unused cables in the box. Before you close the case, press each connector once more and check that every clip is locked, then plug the power cord back in.
What you need

CORSAIR RM1000e ATX 3.1 PCIe 5.1 Ready 1000W Power Supply
A 1000W fully modular supply with a native 12V-2x6 cable and ATX 3.1 support.
View on Amazon
CORSAIR RM1000x ATX 3.1 PCIe 5.1 1000W Power Supply
A 1000W fully modular supply with a native 12V-2x6 connector and ATX 3.1 support.
View on Amazon
MSI MAG A850GL PCIE5
An 850W fully modular supply, 80 PLUS Gold, with ATX 3.1 and PCIe 5.1 support.
View on Amazon
Thermaltake Toughpower GT 850W ATX 3.1 Standard Power Supply
An 850W fully modular supply, 80 PLUS Gold, with a native 12V-2x6 connector and ATX 3.1 support.
View on AmazonThese come from our ranked list Best Power Supply, which compares them spec by spec.
FAQ
Do I need to connect every cable from the power supply?
No. The supplies here are fully modular, so you connect only the cables your build needs. Leave the cables you do not need in the box, and keep them with the supply for later use.
What if the PC does not turn on after connecting the cables?
Check that the main power cable and the CPU power cable are fully seated and their clips are locked. Check that the power cord is plugged in and the switch on the power supply is on.
Can I use cables from a different power supply?
No. Use only the cables that came with your power supply, since the plugs on the supply end differ between models. A cable from another supply may fit the socket but carry power on the wrong pins.




