Amazon Black Friday Week deals

Paid link

PC Components · How-to guide

How to Pick a Power Supply

We earn a commission when you buy through our links, at no extra cost to you. As an Amazon Associate I earn from qualifying purchases.
Short answer

A power supply turns wall power into the power your PC parts use, and picking one comes down to wattage, connectors, size, and efficiency. Add up the power figures published for your parts, check the connectors your graphics card needs, and match the unit to your case. A unit with headroom and the right cables runs the parts you have and leaves room for the parts you add later.

  1. Add up the power your parts draw

    List every part that draws power: the processor, the graphics card, the drives, and the fans. Each part's maker publishes a power figure, so add those figures together to see the total draw of the build. Compare that total with the wattage on the power supply, and leave some headroom above it so the unit is not running at its limit all the time. If you plan to add a stronger graphics card later, factor that in before you buy.

  2. Match the connectors to your parts

    Count the connectors your parts need before you buy. Some newer graphics cards use a 12V-2x6 connector, and a native cable connects the card straight to the supply with no adapter. Check the motherboard, drive, and fan connectors too, and count how many of each the build needs. A fully modular supply lets you connect only the cables the build uses, which keeps spare cables out of the case.

  3. Check the size and the airflow

    Check that the unit fits the space in your case, and leave room for cables and airflow around it. The fan moves air through the unit, and some units slow or stop the fan at low load to keep noise down. An efficiency rating such as 80 PLUS Gold describes how much of the power from the wall reaches your parts, and the rest leaves as heat. A cooler-running unit puts less heat into the case.

  4. Install it with the power off

    Shut the computer down and unplug it before you open the case or fit the supply, and follow the steps in the maker's manual. Connect each cable firmly to the part it serves, and route cables clear of fans. Never open the power supply itself: the parts inside hold a charge even when the unit is unplugged, so contact the maker if the unit fails or shows damage.

What you need

CORSAIR RM1000e ATX 3.1 PCIe 5.1 Ready 1000W Power Supply

CORSAIR RM1000e ATX 3.1 PCIe 5.1 Ready 1000W Power Supply

A 1000 W fully modular supply, ATX 3.1 and PCIe 5.1 ready, with a native 12V-2x6 cable and a 7-year warranty.

View on Amazon
CORSAIR RM1000x ATX 3.1 PCIe 5.1 1000W Power Supply

CORSAIR RM1000x ATX 3.1 PCIe 5.1 1000W Power Supply

A 1000 W fully modular supply, ATX 3.1 and PCIe 5.1 ready, with a native 12V-2x6 connector and a 10-year warranty.

View on Amazon
MSI MAG A850GL PCIE5

MSI MAG A850GL PCIE5

An 850 W fully modular supply, 80 PLUS Gold, ATX 3.1 and PCIe 5.1 ready, with a native 12V-2x6 cable and a 10-year warranty.

View on Amazon
Thermaltake Toughpower GT 850W ATX 3.1 Standard Power Supply

Thermaltake Toughpower GT 850W ATX 3.1 Standard Power Supply

An 850 W fully modular supply, 80 PLUS Gold, ATX 3.1 and PCIe 5.1 ready, with a native 450 W PCIe 5.1 connector and a 5-year warranty.

View on Amazon

These come from our ranked list Best Power Supply, which compares them spec by spec.

FAQ

How many watts should my power supply have?

Add up the power figures published for your processor, graphics card, drives, and fans, then compare the total with the wattage on the supply. Check the power supply figure the graphics card maker publishes for your card, and leave headroom above the total.

What does fully modular mean?

A fully modular supply lets you plug in only the cables your build needs and leave the rest out of the case. That keeps spare cables from blocking airflow and makes the inside of the case easier to keep tidy.

What is 80 PLUS Gold?

80 PLUS Gold is an efficiency rating for a power supply. It describes how much of the power drawn from the wall reaches your parts, with the rest leaving as heat. A higher efficiency rating means less of the power turns into heat inside the case.

Ranked power supplies guides