Amazon Black Friday Week deals

Paid link

Monitors · How-to guide

How to Make a Monitor VESA Compatible

We earn a commission when you buy through our links, at no extra cost to you. As an Amazon Associate I earn from qualifying purchases.
Short answer

A monitor is VESA compatible when it has the square pattern of screw holes on its back, or when an adapter gives it one. Check the back of your monitor for the holes first. If they are there, a VESA plate or mount bolts straight on. If they are not, a clamp or stand adapter adds the pattern so the monitor can mount.

  1. Check the back for VESA holes

    Turn the monitor around and look at the back for a square pattern of screw holes in the middle. Check the monitor's manual or spec sheet as well, since it states whether the monitor supports VESA mounting. If the holes are there, the monitor is already VESA compatible and you only need a mount or arm that fits the pattern. If there are no holes, you need an adapter, covered in the next steps. Do not drill holes in the monitor.

  2. Match the mount to your monitor

    Compare the adapter plate or mount with the holes on the back of your monitor before you buy it. The plate must line up with every hole, and the mount must be rated for your monitor's weight and size. Check the screws that come with the plate as well, since a screw that is too long can reach into the monitor and a screw that is too short will not hold. Keep the manual for the mount nearby while you work.

  3. Fit the adapter plate

    Lay the monitor face down on a soft, flat surface so the screen is protected, and take the stand off. Line the adapter plate up with the holes on the back and fasten it with the screws that came with the plate. Tighten each screw until it is snug, and do not force it further. Once the plate is on, lift the monitor and check that the plate sits flat and does not move.

  4. Use a clamp adapter without holes

    Use an adapter made for a monitor that needs a hole pattern added. Some adapters clamp around the edges of the monitor, and others fit where the stand attaches to the back. Follow the adapter's own instructions to fit it, and check that it grips the monitor firmly and clears the ports and buttons on the back. Once the adapter is fitted, it gives the monitor the hole pattern a mount needs.

  5. Mount the monitor and check it

    Attach the monitor to the arm or wall mount by lining up the plate with the mount and fastening it as the mount's instructions say. Check that the monitor sits level, does not tilt on its own, and stays in place when you move it gently. Plug the cables back in, leaving enough slack for the monitor to move, and check that nothing pulls on the ports.

What you need

Dell 24 Monitor SE2426H

Dell 24 Monitor SE2426H

A 23.8-inch FHD IPS monitor at 144Hz with two HDMI inputs and tilt.

View on Amazon
Dell 27 Gaming Monitor SE2726HG

Dell 27 Gaming Monitor SE2726HG

A 27-inch FHD IPS monitor at 240Hz with HDMI, DisplayPort 1.4 and tilt.

View on Amazon
Acer 23.8-inch Office Monitor KB242Y G0bi

Acer 23.8-inch Office Monitor KB242Y G0bi

A 23.8-inch FHD IPS monitor at 120Hz that is VESA mountable, with HDMI and VGA.

View on Amazon
Sceptre 24-inch Gaming Monitor 1ms E248W-FW100T

Sceptre 24-inch Gaming Monitor 1ms E248W-FW100T

A 24-inch FHD monitor at 100Hz with a VESA wall mount pattern, DisplayPort and two HDMI inputs.

View on Amazon

These come from our ranked list Best PC with Monitor, which compares them spec by spec.

FAQ

How do I know if my monitor is VESA compatible?

Look for the square pattern of screw holes on the back, or check the monitor's manual or spec sheet for VESA mounting. The Acer KB242Y G0bi and the Sceptre Prime 24-inch in this guide state VESA mounting.

Can I mount a monitor with no VESA holes?

Yes. Use an adapter that clamps to the monitor or fits where the stand attaches, and check that it fits your monitor's size and weight before you buy it.

Do I need to remove the monitor stand first?

Take the stand off so the back sits flat and the adapter plate lines up with the holes, and keep the stand and its screws in case you use them later.

Ranked monitors guides