Amazon Black Friday Week deals

Paid link

PC Components · How-to guide

How to Connect GPU Power Cables to a PSU

We earn a commission when you buy through our links, at no extra cost to you. As an Amazon Associate I earn from qualifying purchases.
Short answer

To connect GPU power cables to a PSU, shut the PC down, unplug it, and plug the PSU end of each cable into the matching PSU socket, then the GPU end into the card. Use the native 12V-2x6 cable for a card with a 12V-2x6 socket, and fill every power socket on the card.

  1. Shut down and unplug the PC

    Shut the PC down, unplug it from the wall, and follow the case and PSU manuals for opening the case. Do not open a power supply itself; if the PSU is faulty or under warranty, contact the maker. Work on a clear surface and keep the screws from the side panel in a small dish so they do not roll away.

  2. Match the PSU wattage to the card

    Check the wattage figure the card maker publishes for the card and compare it with the PSU wattage. The CORSAIR RM1000e and CORSAIR RM1000x are 1000W power supplies, and the MSI MAG A850GL PCIE5 and Thermaltake Toughpower GT 850W are 850W power supplies. A PSU with a higher wattage figure does not push extra power into the card; the card draws what it needs. If the card maker publishes a higher wattage than the PSU has, use a PSU with a higher wattage figure.

  3. Check the card and PSU sockets

    Look at the power sockets on the graphics card and count them, then look at the sockets on the PSU. A card with a 12V-2x6 socket takes the native 12V-2x6 cable, and a card with other PCIe sockets takes PCIe cables with matching plugs. Use only the cables that came with the PSU, since cables from another PSU can have different wiring at the PSU end. Check the card maker's published requirements for how many cables the card takes.

  4. Plug in the PSU end first

    Take the PSU end of each cable and push it into the matching socket on the PSU until it seats. On a fully modular PSU, every cable plugs in this way, so connect only the cables the build needs and leave the rest in the box. The CORSAIR RM1000e, CORSAIR RM1000x, MSI MAG A850GL PCIE5 and Thermaltake Toughpower GT 850W are all fully modular. Check that each plug lines up with its socket shape before pushing it in.

  5. Connect the GPU end and check the fit

    Push the GPU end of each cable into the card's power sockets until each connector seats fully, and fill every socket on the card. A loose connector can stop the card from starting, so tug each cable gently to check it holds. Route the cables away from fans and sharp edges, then close the case, plug the PC back in, and start it. If the card does not appear in the display settings, shut the PC down, unplug it, and check the connections again.

What you need

CORSAIR RM1000e ATX 3.1 PCIe 5.1 Ready 1000W Power Supply

CORSAIR RM1000e ATX 3.1 PCIe 5.1 Ready 1000W Power Supply

A 1000W fully modular PSU with a native 12V-2x6 cable, ATX 3.1 and PCIe 5.1, a 120mm fan and a 7-year warranty.

View on Amazon
CORSAIR RM1000x ATX 3.1 PCIe 5.1 1000W Power Supply

CORSAIR RM1000x ATX 3.1 PCIe 5.1 1000W Power Supply

A 1000W fully modular PSU with a native 12V-2x6 connector, Cybenetics Gold efficiency up to 91% and a 10-year warranty.

View on Amazon
MSI MAG A850GL PCIE5

MSI MAG A850GL PCIE5

An 850W fully modular PSU with 80 PLUS Gold, ATX 3.1 and PCIe 5.1, a native 12V-2x6 cable and a 10-year warranty.

View on Amazon
Thermaltake Toughpower GT 850W ATX 3.1 Standard Power Supply

Thermaltake Toughpower GT 850W ATX 3.1 Standard Power Supply

An 850W fully modular PSU with 80 PLUS Gold, a native 450W PCIe 5.1 connector, Smart Zero Fan and a 5-year warranty.

View on Amazon

These come from our ranked list Best Power Supply, which compares them spec by spec.

FAQ

Can I use cables from another PSU?

No. Use only the cables that came with the PSU, since the wiring at the PSU end can differ between brands and models. Check the PSU manual for which sockets each cable uses, and keep the original cables with the PSU they came with.

What is a 12V-2x6 cable?

It is the native power cable for graphics cards with a 12V-2x6 socket, and it plugs straight into the card and the PSU. The CORSAIR RM1000e, CORSAIR RM1000x, MSI MAG A850GL PCIE5 and Thermaltake Toughpower GT 850W all include a native 12V-2x6 cable or connector.

How do I know the cable is seated?

Push the connector in until it stops, then tug it gently to check it holds. Look at the plug from the side: the latch should sit flat against the socket, and no gap should show between the plug and the socket.

Ranked power supplies guides