How to Insert a USB Flash Drive in a Laptop
To insert a flash drive in a laptop, match the drive connector to a matching port on the laptop and push it straight in until it seats. Then open the drive in your file manager to copy files, and eject the drive in the operating system before you pull it out.
Check which ports your laptop has
Look along the sides of the laptop for USB ports. A USB Type-A port is a wide rectangle, and a USB-C port is a smaller oval. Match the shape to the connector on the drive before you insert it. A dual drive carries a USB Type-A connector and a USB-C connector, so you can turn the drive to expose the end that fits. A drive with a single connector needs a port of the same type on the laptop.
Line up the connector
Hold the drive by its body and line the metal connector up with the port. A USB Type-A connector fits in one orientation, so turn the drive over if it meets resistance and try again without force. A USB-C connector fits in either orientation. If the drive has a cover, cap or sliding collar, move that part first so the connector is fully exposed before you line it up.
Push the drive straight in
Push the connector straight into the port with gentle, even pressure. Stop when the connector is seated and the body of the drive sits close to the side of the laptop. Do not push at an angle or wiggle the drive to make it fit. If the connector will not go in, pull it back out, check the orientation and port type again, and then try again.
Open the drive and copy files
Open your file manager and look for the flash drive in the list of drives. Open the drive to see its folders, then copy files between the laptop and the drive in the same way you copy files between folders. Wait until copying has finished and close any files you opened from the drive before you move on to removing it.
Eject the drive before removing it
Use the eject command for the drive in your file manager or operating system. Wait until the system reports that the drive can be removed, then pull the drive straight out by its body. Close the cover or slide the collar back over the connector if your drive has one, and store the drive where the connector stays clean and dry.
What you need

Lexar D40E 256GB Dual USB 3.2 Gen
A 256 GB dual drive with USB Type-A and USB Type-C connectors, USB 3.2 Gen 1 interface and a metal swivel housing.
View on Amazon
Lexar D40E 128GB Dual USB 3.2 Gen
A 128 GB dual drive with USB Type-A and USB Type-C connectors, USB 3.2 Gen 1 interface and a metal swivel housing.
View on Amazon
PNY 256GB Turbo Attaché 3 USB 3.0
A 256 GB USB 3.0 drive with a sliding collar and capless design that also works in USB 2.0 ports.
View on Amazon
PNY 128GB Turbo Attaché 3 USB 3.0
A 2-pack of 128 GB USB 3.0 drives with a sliding collar and capless design for USB 3.0 and USB 2.0 ports.
View on AmazonThese come from our ranked list Best USB Drive, which compares them spec by spec.
FAQ
Which drive fits the ports on my laptop?
Use a drive with the connector that matches a port on the laptop, or a dual drive with a USB Type-A end and a USB-C end. Check the port types on the laptop before you buy a drive for it.
Why does the drive not appear after insertion?
Pull the drive out, check that the connector matches the port, and insert it again straight and fully. Then look again in the file manager, and try a different USB port on the laptop if the drive still does not appear.
Can I leave the drive inserted while copying files?
Yes. Leave the drive inserted while you open, copy or save files on it. When you finish, close the files, eject the drive in the operating system, and then pull it straight out by its body.


