What Is a Bootable USB Flash Drive?
A bootable USB flash drive is a USB flash drive that holds the files a computer needs to start up from the drive. You plug it in, tell the computer to boot from USB, and the computer loads the operating system installer or recovery tool stored on the drive. The drive itself is an ordinary USB flash drive; what makes it bootable is the startup files written to it.
What makes a drive bootable
A flash drive becomes bootable when startup files are written to it in a form the computer can load before its own operating system starts. The files come from an operating system installer or a recovery tool, and a program writes them to the drive along with the instructions the computer follows at startup. Copying ordinary files onto the drive does not make it bootable, since the computer needs those startup instructions to load anything from it.
What you use one for
A bootable USB flash drive installs or repairs an operating system on a computer that cannot start on its own. You use one to set up a new computer, to reinstall an operating system after a drive failure, or to run recovery and diagnostic tools from outside the installed system. The same drive can also carry the installer to more than one computer, since the startup files stay on the drive until you erase them.
Pick a drive for the job
Choose a USB flash drive with USB Type-A or USB Type-C connectors to match the ports on your computer, and check the drive capacity against the installer you plan to write. The Lexar D40E drives here carry both USB Type-A and Type-C connectors in a slim form factor, and the PNY Turbo Attaché 3 drives connect over USB 3.0 and work with USB 2.0 ports. The Lexar D40E has a metal enclosure. The PNY Turbo Attaché 3 drives have a sliding collar with a capless design, and the 256GB PNY drive adds an integrated loop for a key chain.
Boot from the drive
Plug the drive into a USB port, restart the computer, and open the boot menu or the startup settings to choose the USB drive. The key or setting that opens the boot menu varies by computer, so check your computer manual for the exact step. Once the computer starts from the drive, follow the on-screen steps for the installer or recovery tool, and remove the drive only when the tool tells you to.
What you need

Lexar D40E 256GB Dual USB 3.2 Gen
A 256GB dual drive with USB Type-A and Type-C connectors, transfer speeds up to 100MB/s, a metal enclosure and 256-bit AES encryption.
View on Amazon
Lexar D40E 128GB Dual USB 3.2 Gen
A 128GB dual drive with USB Type-A and Type-C connectors, transfer speeds up to 100MB/s and a 360-degree swivel design.
View on Amazon
PNY 256GB Turbo Attaché 3 USB 3.0
A 256GB USB 3.0 flash drive with read speeds up to 100MB/s, a sliding collar capless design and an integrated loop.
View on Amazon
PNY 128GB Turbo Attaché 3 USB 3.0
A two-pack of 128GB USB 3.0 flash drives with read speeds up to 100MB/s and a sliding collar capless design.
View on AmazonThese come from our ranked list Best USB Drive, which compares them spec by spec.
FAQ
Can any USB flash drive be bootable?
Yes, if it holds the startup files and the computer can boot from USB. The drive needs the installer or recovery files written to it in bootable form; copying files onto it is not enough. Check your computer manual to confirm it supports booting from USB.
Does a bootable USB drive erase my files?
Writing the startup files to the drive erases what is already on it, so copy your files off the drive first. Keep a separate copy of anything you need, since the files on the drive are replaced when you make it bootable.
Can I use the drive for storage afterwards?
Yes. Once you erase the startup files and format the drive, it works as an ordinary USB flash drive for files again. Format it through your operating system, and check the drive is empty before you copy files to it.



