How to Connect a GPU to a Power Supply
To hook a GPU up to a power supply, shut the PC down, unplug it, and follow the manuals for the GPU and the power supply. Seat the card in its slot, then run the power cable from the supply to the card and push the connector home. Check that every power socket on the card has a cable, then close the case and switch the PC on.
Check the power connectors first
Check the power sockets on the graphics card and the cables that came with the power supply, and match the cable to the socket the manuals list. A 12V-2x6 connector goes to the matching 12V-2x6 socket on the card, and it only fits one way, so do not force it. Never open the power supply unit itself; contact the maker if the supply is faulty.
Seat the graphics card in its slot
Shut the PC down, unplug it, and open the side panel following the case manual. Remove the slot covers from the back of the case, then push the card into the slot until the latch holds it. Fix the card bracket to the case with the screws that came with the case, and check that the card sits level and does not sag.
Run the cable from the supply
Plug the power cable into the matching socket on the power supply, then route it to the graphics card without sharp bends or pressing it against fan blades. Push the connector fully home until it seats, and check that it sits flush with the socket on the card. With a fully modular supply, only connect the cables your build needs, and leave the rest out of the case.
Check every socket has a cable
Count the power sockets on the graphics card and check that each one has its own cable from the supply. If a socket is empty, fit a cable to it before you switch the PC on, since a card with an empty socket may not start. Use a separate cable for each socket rather than sharing one cable between two sockets.
Power on and check the display
Close the case, plug the power cable back in, and switch the PC on. Check that the display shows a picture and that the card fans spin. If the screen stays blank, shut the PC down, unplug it, and check that each connector sits fully home and that the card sits firmly in its slot.
What you need

CORSAIR RM1000e ATX 3.1 PCIe 5.1 Ready 1000W Power Supply
A 1000W fully modular supply with a native 12V-2x6 cable included, ATX 3.1 and PCIe 5.1 ready, for a direct connection to the graphics card.
View on Amazon
CORSAIR RM1000x ATX 3.1 PCIe 5.1 1000W Power Supply
A 1000W fully modular supply with a native 12V-2x6 connector for a direct GPU to PSU connection, ATX 3.1 and PCIe 5.1 ready.
View on Amazon
MSI MAG A850GL PCIE5
An 850W fully modular supply with a native dual-color 12V-2x6 cable, 80 PLUS Gold, ATX 3.1 and PCIe 5.1 ready.
View on Amazon
Thermaltake Toughpower GT 850W ATX 3.1 Standard Power Supply
An 850W fully modular supply with a native 450W 12V-2x6 connector, 80 PLUS Gold and Smart Zero Fan.
View on AmazonThese come from our ranked list Best Power Supply, which compares them spec by spec.
FAQ
Can I use any power cable to connect a GPU?
No. Use only the cables that came with your power supply, since cables from other supplies can have different wiring. Match the cable to the socket the manuals list, and never force a connector that does not fit.
Do I need a new power supply for a new graphics card?
Check the wattage and connectors the graphics card maker lists for the card, and compare them with your supply. If your supply cannot cover the wattage or the connector the card asks for, fit a supply that does.
What if my graphics card has two power sockets?
Run a separate cable from the power supply to each socket, and push each connector fully home. Do not leave a socket empty, and check the card manual if you are unsure which cables to use.




