Amazon Black Friday Week deals

Paid link

Storage · How-to guide

How to Connect a Flash Drive to a Laptop

We earn a commission when you buy through our links, at no extra cost to you. As an Amazon Associate I earn from qualifying purchases.
Short answer

Plug the flash drive into a USB port on your laptop, then open File Explorer on Windows or Finder on a Mac to see the drive. Use the USB-A end for a standard USB port or the USB-C end for a USB-C port. Once the drive appears, copy files to it and eject it before you pull it out.

  1. Check which ports your laptop has

    Look at the sides of your laptop for a rectangular USB-A port or a small oval USB-C port. A drive with a USB-A connector fits the rectangular port, and a drive with a USB-C connector fits the oval one. Some drives have both connectors on one body, so you can use either port on your laptop.

  2. Plug in the drive

    Push the drive into the port until it sits firmly, with the connector facing the right way. A USB-A plug goes in one way only, so flip it over if it resists instead of forcing it. A USB-C plug works either way up. Wait a few seconds while your laptop recognizes the drive, and look for a notification that a new device is ready.

  3. Open the drive and move files

    On Windows, open File Explorer and click the drive under This PC. On a Mac, open Finder and click the drive in the sidebar. Drag files onto the drive to copy them, or copy and paste. Wait until the copy finishes before you close the window or remove the drive.

  4. Eject the drive before you remove it

    On Windows, right-click the drive in File Explorer and choose Eject, or use the eject icon in the taskbar. On a Mac, drag the drive icon to the Trash, or click the eject button next to it in Finder. Wait until the laptop says the drive is ready to remove, then pull it out.

  5. Fix a drive your laptop fails to show

    Try another USB port on the laptop, and try the drive on another computer if you can. Check that the drive is pushed fully into the port and that nothing covers the connector. If the drive still fails to appear, open Disk Management on Windows or Disk Utility on a Mac to see whether the drive appears there without a drive letter.

What you need

Lexar D40E 256GB Dual USB 3.2 Gen

Lexar D40E 256GB Dual USB 3.2 Gen

A 256 GB dual drive with USB-A and USB-C connectors, read speeds up to 100 MB/s, a metal housing and a swivel design.

View on Amazon
Lexar D40E 128GB Dual USB 3.2 Gen

Lexar D40E 128GB Dual USB 3.2 Gen

A 128 GB dual drive with USB-A and USB-C connectors, read speeds up to 100 MB/s and a metal housing with a swivel design.

View on Amazon
PNY 256GB Turbo Attaché 3 USB 3.0

PNY 256GB Turbo Attaché 3 USB 3.0

A 256 GB USB 3.0 drive with read speeds up to 100 MB/s, a sliding collar capless design and backward compatibility with USB 2.0 ports.

View on Amazon
PNY 128GB Turbo Attaché 3 USB 3.0

PNY 128GB Turbo Attaché 3 USB 3.0

A two-pack of 128 GB USB 3.0 drives with read speeds up to 100 MB/s, a sliding collar capless design and backward compatibility with USB 2.0 ports.

View on Amazon

These come from our ranked list Best USB Drive, which compares them spec by spec.

FAQ

Can I use the same flash drive on Windows and Mac?

Yes, if the drive uses a file system both systems read. Many drives come formatted so both Windows and macOS can read and write them. Check the drive's format in your computer's disk tool if a file will not copy.

Why does my laptop not see the flash drive?

The drive may sit in a port with a loose connection, or the port may be disabled in your laptop's settings. Try another port, then check Disk Management on Windows or Disk Utility on a Mac to see whether the drive appears.

Do I need to install software to use a flash drive?

No. Laptops recognize most flash drives without extra software, and the drive appears in File Explorer or Finder once you plug it in. Some drives include security software, but it is not needed to copy files.

Ranked usb flash drives guides