How to Connect a Flash Drive to a Computer
Plug a flash drive into a USB port on your computer, then open the drive in your file manager to copy files in or out. A USB-A connector fits a rectangular USB-A port, and a drive with a USB-C connector fits an oval USB-C port. If the shapes do not match, use a drive with the matching connector, such as a dual drive with USB-A and USB-C.
Check which USB port your computer has
Look at the ports on your computer before you plug anything in. A USB-A port is rectangular, and a USB-C port is a small oval shape. Match the connector on your drive to the port shape. The Lexar D40E has both USB-A and USB-C connectors on one drive, and its swivel design lets you switch between them. If your drive has only one connector type, use the port that matches it.
Plug the drive in firmly
Hold the drive by its body and line up the connector with the port. Push it in straight until it sits firmly in the port. Do not force it at an angle, and do not push it into a port that is a different shape. If the drive feels loose, pull it out and try another USB port on the same computer. The computer should open a window for the drive, or show it in your file manager.
Open the drive and move your files
Open your file manager and find the drive by its name or drive letter. Double-click it to see the files stored on it. To add files, drag them from a folder on your computer into the drive window, or copy and paste them. To take files off the drive, drag them from the drive window to a folder on your computer. Wait until the copy finishes before you close the window.
Eject the drive before you remove it
Do not pull the drive out while files are still copying. When the copy is done, eject the drive from your file manager or from the drive icon on your desktop or taskbar. Wait for the removal message from your operating system. Then pull it straight out of the port. Ejecting first tells the operating system to finish writing to the drive before removal.
What you need

Lexar D40E 256GB Dual USB 3.2 Gen
A 256 GB dual drive with USB-A and USB-C connectors, a rated read speed of up to 100 MB/s, a metal housing and a 360-degree swivel design.
View on Amazon
Lexar D40E 128GB Dual USB 3.2 Gen
A 128 GB dual drive with USB-A and USB-C connectors, a rated read speed of up to 100 MB/s, a metal housing and a 360-degree swivel design.
View on Amazon
PNY 256GB Turbo Attaché 3 USB 3.0
A 256 GB USB 3.0 drive with a rated read speed of up to 100 MB/s, a sliding collar, a capless design and an integrated loop.
View on Amazon
PNY 128GB Turbo Attaché 3 USB 3.0
A 2-pack of 128 GB USB 3.0 drives with a rated read speed of up to 100 MB/s, a sliding collar and a capless design.
View on AmazonThese come from our ranked list Best USB Drive, which compares them spec by spec.
FAQ
Why does my computer not show the flash drive?
Try a different USB port on the same computer, and check that the drive is pushed in fully. If the drive still does not appear, open your file manager and look for a new drive letter or device name. If it appears on another computer, the first port may be the problem.
Can I use a flash drive with a USB-C laptop?
Yes, if the drive has a USB-C connector or a dual connector. The Lexar D40E has both USB-A and USB-C connectors, so you swivel it to the USB-C end for a USB-C port. A drive with only a USB-A connector does not fit a USB-C port.
Do I need to install software to use a flash drive?
No extra software is needed for the Lexar D40E, which works with no software installation required. Plug the drive in, open it in your file manager, and copy files in or out. Eject the drive before you pull it out.


