How to Clean a White Mouse
To clean a white mouse, unplug it or switch it off, then wipe the shell with a soft cloth dampened with water and mild soap. Work in short strokes, dry the surface with a second soft cloth, and clean the wheel, buttons, sensor, and feet with a dry cloth or a soft brush. Let the mouse dry fully before you plug it in or switch it on again.
Unplug the mouse first
Unplug a wired mouse from your computer, or switch off a wireless mouse before you start. If the mouse uses a removable battery, take it out and set it aside. Put the mouse on a clean, dry surface with good light, so you can see marks on the white shell. Wash and dry your hands first, so you do not add dirt or grease while you clean.
Remove dust from the surface
Turn the mouse upside down and tap it gently over a bin to drop loose dust and crumbs. Use a soft, dry brush or a dry microfiber cloth to sweep dust from the shell, the seams, and around the buttons. Pay close attention to the scroll wheel, where dust and dirt collect in the grooves. Do not use a sharp tool to scrape the surface, since it can scratch the white finish.
Wipe the white shell
Dampen a soft cloth with water and a small amount of mild soap, then wring it out until it is only slightly damp. Wipe the shell in short, even strokes, and rinse the cloth and wring it out again when it picks up dirt. For marks around the buttons and the palm rest, press the cloth flat and rub the spot with light pressure. Avoid harsh cleaners, solvents, and abrasive pads, which can dull or stain the white surface.
Clean the wheel and crevices
Use a dry cotton swab or a soft brush to clean the scroll wheel, the gaps beside the buttons, and the seams along the sides. Roll the wheel slowly as you brush it, so you reach the full surface. For dirt in a narrow gap, use the tip of a dry swab and light pressure, and wipe the area with a dry cloth after. Keep liquid out of the gaps, since water left inside can reach the parts under the shell.
Clean the sensor and feet
Turn the mouse over and wipe the sensor window with a clean, dry cloth, using light strokes from the center outward. Brush dust from the feet on the base, and wipe them with a dry cloth so the mouse glides on a clean surface. Check that no cloth fibers stay on the sensor or the feet. Leave the mouse to dry fully in the open air before you plug it in, switch it on, or put the battery back.
What you need

Logitech G305 LIGHTSPEED Wireless Gaming Mouse
A wireless mouse with a 12,000 DPI Hero 12K sensor and 6 programmable buttons, so no cable gets in the way while you wipe the shell.
View on Amazon
Redragon M908 Wired MMO RGB Gaming Mouse 12400 DPI Remapping Keys
A wired mouse with a 12400 DPI Pixart PAW3327 sensor and 18 programmable buttons, with a 6ft braided-fiber cable that ensures greater durability.
View on Amazon
GravaStar Mercury M2 Wireless Gaming Mouse
A wireless mouse with a 26000 DPI PAW3395DM sensor and a hollowed-out design, so you can see dust in the openings before you clean them.
View on Amazon
Redragon M612 Wired RGB Optical Gaming Mouse 8000 DPI Remapping Keys
A wired mouse with an 8000 DPI sensor and a skin-friendly frosted coating, with 11 programmable buttons for work and games after cleaning.
View on AmazonThese come from our ranked list Best Mouse, which compares them spec by spec.
FAQ
Can I use water to clean a white mouse?
Yes, use a soft cloth that is only slightly damp. Wring the cloth out well, wipe the shell, and dry it at once with a second soft cloth. Keep water out of the gaps, the sensor, and the wheel.
How do I remove stains from a white mouse?
Wipe the mark with a soft cloth dampened with water and mild soap, using light pressure and short strokes. Rinse the cloth, wring it out, and wipe the area again. Dry the shell at once, and repeat the wipe if the mark stays.
Should I clean the mouse while it is plugged in?
No. Unplug a wired mouse or switch off a wireless mouse before you clean it. This keeps the buttons and wheel from sending clicks while you work, and it keeps liquid away from a live connection. Put the battery back or plug the mouse in only after it is dry.




