Amazon Black Friday Week deals

Paid link

Keyboards & Mice · How-to guide

How to Clean PTFE Mouse Feet

We earn a commission when you buy through our links, at no extra cost to you. As an Amazon Associate I earn from qualifying purchases.
Short answer

PTFE mouse feet are the smooth pads on the bottom of your mouse, and you clean them by wiping away dust and grime so they glide again. Turn the mouse over, wipe each pad with a soft, dry cloth, then wipe again with a cloth dampened with a little isopropyl alcohol and let the pads dry before you use the mouse.

  1. Turn the mouse over and inspect the feet

    Switch the mouse off or unplug it, then turn it over so the feet face up. Look at each pad for dust, hair, crumbs and sticky grime, and check the edges where dirt collects. Pick off any loose debris with your fingers so you do not drag it across the pad when you wipe.

  2. Wipe the feet with a dry cloth

    Wipe each pad with a soft, dry, lint-free cloth, using light, even strokes. The cloth lifts dust and surface grime without scratching the pad. Wipe the area around the feet as well, since dirt there ends up back on the pads. If the pads still feel rough or sticky, move on to a damp wipe.

  3. Use a damp cloth for stuck grime

    Dampen a clean cloth with a little isopropyl alcohol and wipe each pad again. The alcohol loosens sticky grime that a dry cloth leaves behind. Keep the cloth damp, not wet, and keep liquid off the sensor and buttons. Let the pads dry fully before you put the mouse back on the pad.

  4. Check the glide and the mousepad

    Put the mouse back on its mousepad and move it in circles to feel the glide. If a pad still drags, wipe it again and check for a raised edge or a piece of grit stuck to it. Wipe the mousepad too, since a dirty pad surface puts grime back on the feet.

What you need

Logitech G305 LIGHTSPEED Wireless Gaming Mouse

Logitech G305 LIGHTSPEED Wireless Gaming Mouse

A wireless mouse with a HERO 12K sensor at 12,000 DPI, 6 programmable buttons and a weight of 0.21 lb.

View on Amazon
Redragon M908 Wired MMO RGB Gaming Mouse 12400 DPI Remapping Keys

Redragon M908 Wired MMO RGB Gaming Mouse 12400 DPI Remapping Keys

A wired mouse with durable smooth Teflon feet pads, 18 programmable buttons and a Pixart PAW3327 sensor at 12400 DPI.

View on Amazon
GravaStar Mercury M2 Wireless Gaming Mouse

GravaStar Mercury M2 Wireless Gaming Mouse

A wireless mouse with a PAW3395DM sensor at 26,000 DPI, 5 programmable buttons and a hollowed-out design.

View on Amazon
Redragon M612 Wired RGB Optical Gaming Mouse 8000 DPI Remapping Keys

Redragon M612 Wired RGB Optical Gaming Mouse 8000 DPI Remapping Keys

A wired mouse with 11 programmable buttons, 5 DPI levels from 500 to 8000 DPI and a frosted coating on the grip.

View on Amazon

These come from our ranked list Best Mouse, which compares them spec by spec.

FAQ

Can I use water to clean PTFE mouse feet?

Wipe dust with a dry cloth, and wipe sticky grime with a cloth dampened with a little isopropyl alcohol. Water leaves the pads damp longer, so keep the cloth barely damp and let the pads dry fully before you use the mouse.

How do I know the mouse feet need cleaning?

The mouse drags, skips or feels rough when you move it, even on a clean mousepad. Turn the mouse over and look at the pads: dust, hair and sticky grime show up as dark buildup on the smooth surface.

Should I peel off the mouse feet to clean them?

No. Wipe the pads while they stay on the mouse, since peeling them off can bend them or weaken the bond that holds them in place. If a pad is torn or will not sit flat, check the guidance from the mouse maker about a replacement set.

Ranked mice guides