How to Clean an Oily Mouse
To clean an oily mouse, switch it off or unplug it, then wipe the shell with a cloth that is damp, not wet. A dry cloth lifts loose dirt first, and a cloth dampened with water or isopropyl alcohol removes the oil film from the shell, buttons and wheel. Clean the sensor lens and feet, let the mouse dry fully, and only then reconnect it.
Turn the mouse off first
Switch the mouse off before you clean it. Unplug a wired mouse from the computer, and switch a wireless mouse off so clicks and movement do not reach the screen while you wipe. If the mouse has a removable battery, take it out before cleaning. Keep liquids away from the open battery bay and the charging port, and do not open the shell of the mouse.
Lift loose dirt with a dry cloth
Start with a dry microfiber cloth. Wipe the top shell, sides and buttons to lift loose dirt, dust and crumbs before any liquid touches the mouse. Turn the mouse over and tap it gently against your palm so crumbs fall out of the gaps around the buttons and wheel. Removing the loose layer first keeps the damp cloth from spreading grit across the shell.
Wipe the shell with a damp cloth
Dampen a microfiber cloth with water or isopropyl alcohol, then wring it out so it feels damp and not wet. Wipe the shell, buttons and scroll wheel in small sections, turning the cloth to a clean area as oil lifts off. Keep liquid out of the gaps around the buttons and wheel, and never spray liquid straight onto the mouse. For stubborn oil, dampen the cloth again rather than pressing harder.
Clean the sensor and feet
Oil and dust on the sensor lens and the feet change how the mouse tracks and glides. Use a cotton swab lightly dampened with water or isopropyl alcohol to clean the sensor lens, and wipe each foot pad until no film remains. Wipe the mousepad surface as well, since oil on the pad transfers back to the feet. Keep the swab damp, not dripping, so no liquid runs into the sensor opening.
Let it dry before reconnecting
Let the mouse dry fully before you switch it on or plug it back in. A dry shell, wheel and sensor lens mean no liquid is left to reach the switches or the sensor. If the cursor still skips or a button still sticks after cleaning, the problem sits inside the mouse, so contact the maker rather than opening the shell. Shiny patches and a slippery grip are the signs that oil has built up again.
What you need

Logitech G305 LIGHTSPEED Wireless Gaming Mouse
A wireless mouse with a compact design, built-in nano receiver storage and a 3.4 oz weight, easy to lift off the desk for cleaning.
View on Amazon
Redragon M908 Wired MMO RGB Gaming Mouse 12400 DPI Remapping Keys
A wired mouse with TEFLON feet pads and a 6ft braided-fiber cable; unplug the cable before wiping the shell and feet.
View on Amazon
GravaStar Mercury M2 Wireless Gaming Mouse
A wireless mouse with a hollowed-out design and 2.4G, Bluetooth and wired connection options; switch it off before cleaning the shell.
View on Amazon
Redragon M612 Wired RGB Optical Gaming Mouse 8000 DPI Remapping Keys
A wired mouse with a skin-friendly frosted coating and rubber texture on the left side, unplugged before you wipe the shell.
View on AmazonThese come from our ranked list Best Mouse, which compares them spec by spec.
FAQ
Can I use water to clean a mouse?
Yes, on a cloth. Dampen the cloth and wring it out so it is damp, not wet, and keep liquid out of the gaps around the buttons, wheel and sensor. Never soak the mouse or spray liquid straight onto it.
How do I know the oil is back?
Watch for shiny patches on the shell, a grip that feels slippery, buttons that stick and a cursor that skips on the pad. Those signs mean oil and dirt have built up on the shell, feet or sensor lens again.
Can I open the mouse to clean inside?
Do not open the shell. Clean the outside, the sensor lens and the feet, and let the mouse dry fully before reconnecting it. If clicks still stick or the cursor still skips after cleaning, contact the maker for help.




