Amazon Black Friday Week deals

Paid link

Keyboards & Mice · How-to guide

How to Clean a Mouse Sensor

We earn a commission when you buy through our links, at no extra cost to you. As an Amazon Associate I earn from qualifying purchases.
Short answer

Turn the mouse off or unplug it, flip it over, and wipe the optical sensor lens on the underside with a dry microfiber cloth. Brush away loose dust first, then use short bursts of compressed air for dust caught in the sensor recess. Let the lens dry fully before you plug the mouse back in and use it again.

  1. Turn the mouse off and unplug it

    Switch a wireless mouse off before you clean it, and unplug a wired mouse from the computer. This stops stray clicks while you work and keeps the sensor from reading the cloth as movement. Flip the mouse over so the sensor lens on the underside faces up and you can see the dust on it.

  2. Brush loose dust off the sensor

    Use a soft brush or a dry microfiber cloth to sweep dust away from the sensor lens and the ring around it. Work with light strokes and let the dust fall away from the mouse. Do not use sharp objects, pens or fingernails on the lens, since a scratched lens can make tracking worse instead of better.

  3. Blow dust out with compressed air

    Hold a can of compressed air upright and use short bursts to clear dust from the sensor recess and the gaps around it. Keep the nozzle away from the lens and do not shake the can while you spray. Short bursts move the dust without pushing it deeper into the mouse, and the air dries on its own.

  4. Wipe the lens with a cloth

    Wipe the sensor lens gently with a clean microfiber cloth, using small circles until the lens looks clear. If dust still clings to the lens, dampen one corner of the cloth with a little water and wipe again, then dry the lens with the dry part of the cloth. Never pour water or cleaner onto the mouse, and never press hard on the lens.

  5. Check the tracking after cleaning

    Plug the mouse back in or switch it on again, then move it across your mousepad and watch the cursor. Smooth movement means the lens is clear. If the cursor still jumps or stops, repeat the brushing and wiping steps, and check the mousepad for dust and wear. Do not open the mouse to reach the sensor; contact the maker if cleaning the outside lens does not fix the tracking.

What you need

Logitech G305 LIGHTSPEED Wireless Gaming Mouse

Logitech G305 LIGHTSPEED Wireless Gaming Mouse

A wireless mouse with a HERO 12K optical sensor rated up to 12,000 DPI, with 6 programmable buttons and on-board memory.

View on Amazon
Redragon M908 Wired MMO RGB Gaming Mouse 12400 DPI Remapping Keys

Redragon M908 Wired MMO RGB Gaming Mouse 12400 DPI Remapping Keys

A wired mouse with a Pixart PAW3327 optical sensor rated up to 12400 DPI and 5 adjustable DPI levels.

View on Amazon
GravaStar Mercury M2 Wireless Gaming Mouse

GravaStar Mercury M2 Wireless Gaming Mouse

A wireless mouse with a PAW3395DM sensor rated up to 26,000 DPI and a 1K Hz polling rate.

View on Amazon
Redragon M612 Wired RGB Optical Gaming Mouse 8000 DPI Remapping Keys

Redragon M612 Wired RGB Optical Gaming Mouse 8000 DPI Remapping Keys

A wired optical mouse rated up to 8000 DPI with 5 DPI levels and 11 programmable buttons.

View on Amazon

These come from our ranked list Best Mouse, which compares them spec by spec.

FAQ

Can I use water to clean a mouse sensor?

Yes, but only a little. Dampen one corner of a microfiber cloth with water, wipe the lens gently, then dry it with the dry part of the cloth. Never pour water onto the mouse.

How often should I clean a mouse sensor?

Clean it when you see signs of dust, such as a cursor that jumps, skips or stops moving, or when you can see dust on the lens. A mouse used on a dusty desk needs cleaning more often.

Should I open the mouse to clean the sensor?

No. Clean only the lens you can reach on the underside. Opening the mouse can damage parts inside, so contact the maker if cleaning the outside lens does not fix the tracking.

Ranked mice guides