Amazon Black Friday Week deals

Paid link

Keyboards & Mice · How-to guide

How to Clean a Sticky Mouse Rubber Coating

We earn a commission when you buy through our links, at no extra cost to you. As an Amazon Associate I earn from qualifying purchases.
Short answer

Unplug the mouse or switch it off, then wipe the sticky rubber with a cloth barely dampened with water and a drop of mild soap. For a coating that stays tacky, wipe it again with isopropyl alcohol on a cloth, then dry the mouse before you plug it back in. If the coating stays sticky after cleaning, the rubber layer has broken down and a replacement mouse is the fix.

  1. Unplug the mouse and remove power

    Unplug a wired mouse from the computer, and switch a wireless mouse off and take out its battery if it has a removable one. Cleaning a mouse that still has power can send stray clicks and can move the pointer while you work. Put the mouse on a dry cloth with the buttons facing up, and keep liquid away from the sensor opening and the scroll wheel gap.

  2. Wipe the coating with soap and water

    Dampen a soft cloth with water and a drop of mild dish soap, then wring it out until it is barely damp. Wipe the sticky areas in small circles, and rinse the cloth and wring it out again when it picks up grime. Do not pour water on the mouse and do not soak the cloth, since liquid that gets inside can damage the switches and the sensor. Let the surface dry before you judge the result.

  3. Lift stubborn stickiness with alcohol

    If the rubber still feels tacky after soap and water, dampen a fresh cloth with isopropyl alcohol and wipe the sticky areas again. Alcohol can lift the degraded top layer of a soft-touch coating, so wipe gently and check the surface as you go. Keep alcohol away from the sensor lens and the scroll wheel, and let the mouse dry fully before you plug it in or switch it on.

  4. Clean the sensor and the feet

    Turn the mouse over and wipe the sensor opening with a dry cloth, then wipe the glide feet around it. Dust and grime on the feet can make the mouse drag, which feels like a tracking problem even when the sensor is clean. If a foot is peeling, press it back flat or replace it, since a lifted foot catches on the desk and wears unevenly.

  5. When cleaning is not enough

    A rubber coating that stays sticky after soap and alcohol has broken down, and no amount of wiping restores the original grip. At that point you can live with the tacky feel, cover the grip with a skin or tape, or move to a replacement mouse. The mice below are the ones this guide shows, and each one lists its own sensor and buttons, so compare those figures before you buy.

What you need

Logitech G305 LIGHTSPEED Wireless Gaming Mouse

Logitech G305 LIGHTSPEED Wireless Gaming Mouse

A wireless mouse with a 12,000 DPI HERO sensor, 6 programmable buttons and 250 hours of battery life on one AA battery.

View on Amazon
Redragon M908 Wired MMO RGB Gaming Mouse 12400 DPI Remapping Keys

Redragon M908 Wired MMO RGB Gaming Mouse 12400 DPI Remapping Keys

A wired mouse with a 12,400 DPI sensor, 18 programmable buttons and a 6-foot braided cable.

View on Amazon
GravaStar Mercury M2 Wireless Gaming Mouse

GravaStar Mercury M2 Wireless Gaming Mouse

A wireless mouse with a 26,000 DPI sensor, 5 programmable buttons and up to 85 hours of battery life.

View on Amazon
Redragon M612 Wired RGB Optical Gaming Mouse 8000 DPI Remapping Keys

Redragon M612 Wired RGB Optical Gaming Mouse 8000 DPI Remapping Keys

A wired mouse with an 8,000 DPI sensor, 11 programmable buttons and a rubber-textured left side.

View on Amazon

These come from our ranked list Best Mouse, which compares them spec by spec.

FAQ

Can I use water to clean a sticky mouse?

Yes, with a cloth that is barely damp. Wring the cloth out well, wipe the sticky areas, and keep water away from the sensor opening and the scroll wheel gap. Let the mouse dry fully before you plug it in or switch it on.

Why does a mouse rubber coating turn sticky?

The soft rubber layer breaks down with age, heat and skin oils, and the surface turns tacky instead of smooth. Cleaning removes grime from the surface, but it cannot rebuild a coating that has already broken down.

How often should I clean my mouse?

Clean it when the surface starts to feel sticky or dusty, and when the glide feet pick up grime that makes the mouse drag. A quick wipe when you notice the change keeps the coating in better shape than waiting until it turns tacky.

Ranked mice guides