Amazon Black Friday Week deals

Paid link

Keyboards & Mice · How-to guide

How to Clean Mouse Clicker Buttons

We earn a commission when you buy through our links, at no extra cost to you. As an Amazon Associate I earn from qualifying purchases.
Short answer

To clean mouse clicker buttons, switch the mouse off or unplug it, then clear dust from around the buttons with a soft brush or a short burst of compressed air. Wipe the buttons with a soft cloth that is only slightly damp, and keep liquid out of the seams and sensor. Let the mouse dry fully before you plug it back in or switch it on.

  1. Turn the mouse off first

    Unplug a wired mouse from the computer, and switch a wireless mouse off before you start. If the mouse has a removable battery, take it out while you clean. A mouse that stays powered can register clicks while you work, and cleaning a live mouse can send stray input to the computer. Work on a clean, dry surface with good light so you can see dust and crumbs around the buttons.

  2. Clear dust from around the buttons

    Hold the mouse upside down and tap it gently so loose crumbs fall out. Use a soft brush to sweep dust away from the gaps between the buttons and the shell, and use short bursts of compressed air to push dust out of the seams. Keep the can upright and hold it a short distance from the mouse so no moisture reaches the surface. Work around each button in turn, including the scroll wheel and side buttons.

  3. Wipe the buttons with a damp cloth

    Dampen a soft, lint-free cloth with a little water and wring it out so it feels barely damp. Wipe the top of each button and the shell around it, then dry the surface with a second clean cloth. Never spray water or cleaner straight onto the mouse, and never let liquid pool in the seams or near the sensor underneath. If the buttons feel sticky, wipe them again with the damp cloth and dry them right away.

  4. Clean along the button edges

    Dust and skin oils collect along the thin seam where each button meets the shell. Run a dry cotton swab or the corner of a soft cloth along that seam to lift the dirt out. Press the button down gently so you can reach the edge that hides when the button sits at rest, then release it and wipe the seam again. Do not push tools into the gap or pry the button up, since that can damage the switch underneath.

  5. Let the mouse dry fully

    Leave the mouse on a dry surface with the buttons facing up until every part feels dry to the touch. Do not use a hair dryer or put the mouse near a heater to speed this up. Once it is dry, put the battery back in if you removed it, plug the mouse in or switch it on, and click each button a few times to check that it presses and releases cleanly.

What you need

Logitech G305 LIGHTSPEED Wireless Gaming Mouse

Logitech G305 LIGHTSPEED Wireless Gaming Mouse

A wireless mouse with a Hero 12K sensor, 12,000 DPI, 6 programmable buttons and a lightweight design for cleaning around the buttons.

View on Amazon
Redragon M908 Wired MMO RGB Gaming Mouse 12400 DPI Remapping Keys

Redragon M908 Wired MMO RGB Gaming Mouse 12400 DPI Remapping Keys

A wired mouse with 12,400 DPI, 18 programmable buttons, RGB backlight and a 6-foot braided cable.

View on Amazon
GravaStar Mercury M2 Wireless Gaming Mouse

GravaStar Mercury M2 Wireless Gaming Mouse

A wireless mouse with 26,000 DPI, a PAW3395DM sensor, 5 programmable buttons and 5 dynamic RGB light modes.

View on Amazon
Redragon M612 Wired RGB Optical Gaming Mouse 8000 DPI Remapping Keys

Redragon M612 Wired RGB Optical Gaming Mouse 8000 DPI Remapping Keys

A wired mouse with 8,000 DPI, 11 programmable buttons, 5 backlit modes and a frosted coating on the grip.

View on Amazon

These come from our ranked list Best Mouse, which compares them spec by spec.

FAQ

Can I use water to clean mouse buttons?

A cloth that is only slightly damp is enough. Do not run the mouse under water or spray liquid onto it, since water can reach the switch or sensor inside and stop the buttons working.

What should I do if a button still sticks?

Clean the seam around the button again and check for crumbs or dried residue caught under the edge. If the button keeps sticking after a second clean, stop and contact the maker for advice instead of opening the mouse yourself.

How often should I clean my mouse buttons?

Clean them when clicks start to feel sticky, when you can see dust in the seams, or when a button does not press and release cleanly. Mice used every day pick up skin oils and dust faster, so watch for those signs rather than following a fixed schedule.

Ranked mice guides