Amazon Black Friday Week deals

Paid link

Keyboards & Mice · How-to guide

How to Clean a Mouse Ball

We earn a commission when you buy through our links, at no extra cost to you. As an Amazon Associate I earn from qualifying purchases.
Short answer

To clean a mouse ball, turn the mouse over, twist open the round cover, and tip the ball out. Wipe the ball with a cloth dampened with water or isopropyl alcohol, scrape the dirt off the rollers inside, and let everything dry before you put the ball back.

  1. Turn the mouse over and open the cover

    Unplug the mouse or switch it off, then turn it over on a clean surface. Find the round cover around the ball and twist it in the direction of the arrows marked on it. Tip the mouse over your hand so the ball drops out, and set the cover and the ball aside.

  2. Wash and dry the ball

    Wipe the ball with a soft cloth dampened with water. For stuck-on dirt, wash the ball with mild soap and water, or wipe it with a cloth dampened with isopropyl alcohol. Dry the ball with a clean cloth and let it sit until it is fully dry, since a damp ball picks up fresh dirt as soon as it rolls.

  3. Scrape the dirt off the rollers

    Look inside the ball cavity and find the rollers the ball turns against. Dirt builds up as a hard ring on each roller, and that ring is what makes the cursor stick and jump. Scrape the ring off with tweezers, a fingernail, or the edge of a plastic card, then wipe the rollers with a cotton swab dampened with isopropyl alcohol. Blow out any loose crumbs before you close the mouse.

  4. Put the ball back and check the cursor

    Drop the dry ball back into the cavity and twist the cover closed until it locks. Plug the mouse back in or switch it on, then move it in slow circles and straight lines. The cursor should track smoothly in every direction. If it still sticks in one direction, open the cover again and check the roller for that direction for leftover dirt.

What you need

Logitech G305 LIGHTSPEED Wireless Gaming Mouse

Logitech G305 LIGHTSPEED Wireless Gaming Mouse

A wireless optical mouse with a 12,000 DPI HERO sensor and 6 programmable buttons, with no ball to clean.

View on Amazon
Redragon M908 Wired MMO RGB Gaming Mouse 12400 DPI Remapping Keys

Redragon M908 Wired MMO RGB Gaming Mouse 12400 DPI Remapping Keys

A wired optical mouse with up to 12400 DPI and 18 programmable buttons, with no ball to clean.

View on Amazon
GravaStar Mercury M2 Wireless Gaming Mouse

GravaStar Mercury M2 Wireless Gaming Mouse

A wireless mouse with 26,000 DPI and 5 programmable buttons, with no ball to clean.

View on Amazon
Redragon M612 Wired RGB Optical Gaming Mouse 8000 DPI Remapping Keys

Redragon M612 Wired RGB Optical Gaming Mouse 8000 DPI Remapping Keys

A wired optical mouse with 8000 DPI and 11 programmable buttons, with no ball to clean.

View on Amazon

These come from our ranked list Best Mouse, which compares them spec by spec.

FAQ

Why does my mouse cursor stick and jump?

Dirt from the desk collects on the ball and builds up as a hard ring on the rollers inside the mouse. The ring makes the ball slip, so the cursor sticks, jumps, or stops in one direction. Cleaning the ball and the rollers removes the ring and restores smooth tracking.

How often should I clean the mouse ball?

Clean it when you notice the signs: the cursor sticks, jumps, or needs a harder push to move. A clean mouse pad slows the buildup, since the ball picks up dirt from the surface it rolls on. If cleaning stops helping, check the rollers for worn or damaged spots.

Do optical mice need this cleaning?

No. An optical mouse tracks movement with a sensor instead of a ball and rollers, so there is no ball to remove and no rollers to scrape. Wipe the underside and the sensor window with a dry cloth if dust collects there, and keep the surface under the mouse clean.

Ranked mice guides