Amazon Black Friday Week deals

Paid link

Keyboards & Mice · How-to guide

How to Clean a Greasy Mouse

We earn a commission when you buy through our links, at no extra cost to you. As an Amazon Associate I earn from qualifying purchases.
Short answer

Unplug the mouse or switch it off, then wipe the shell with a cloth lightly dampened with water and a little mild soap. Work around the buttons and the scroll wheel with a dry cotton swab, and wipe the sensor lens with a dry cloth. Let the mouse dry fully before you plug it back in or switch it on.

  1. Power the mouse off first

    Unplug a wired mouse from the computer before you clean it. Switch a wireless mouse off, and take the battery out if it has one, so no buttons get pressed while you work. This also keeps the sensor dark while you wipe the underside. Never clean a mouse that is still connected or switched on.

  2. Wipe the shell with a damp cloth

    Dampen a soft lint-free cloth with water and a little mild soap, then wring it out until it is barely damp. Wipe the top, sides and buttons in turn, rinsing and wringing the cloth when it picks up grease. Keep liquid out of the seams around the buttons and the scroll wheel. For stubborn spots, wipe again with the same cloth rather than soaking the shell.

  3. Clean around the buttons and scroll wheel

    Grease collects where fingers rest: along the button edges and around the scroll wheel. Work a dry cotton swab along each seam and around the wheel, rolling the wheel slowly so you reach all sides. A wooden toothpick can lift dried grease from a tight seam, but press lightly so you do not scratch the shell or push dirt deeper. Finish with a dry wipe.

  4. Wipe the sensor and the feet

    Turn the mouse over and wipe the sensor lens on the underside with a dry soft cloth, since a greasy lens makes the pointer jump or lag. Wipe around the feet pads as well, and pick off any dust or hair stuck to their edges. Do not peel the feet pads off or soak them, because they keep the mouse gliding flat on the desk.

  5. Let the mouse dry before you use it

    Leave the mouse out in the open until every surface feels dry to the touch, including the seams and the scroll wheel. Then plug a wired mouse back in or put the battery back in a wireless mouse and switch it on. Move the pointer and click each button to check that nothing sticks. If a button still feels tacky, wipe it once more and let it dry again.

What you need

Logitech G305 LIGHTSPEED Wireless Gaming Mouse

Logitech G305 LIGHTSPEED Wireless Gaming Mouse

A compact wireless mouse with a 12,000 DPI HERO sensor, 6 programmable buttons and on-board memory, at 0.21 lb.

View on Amazon
Redragon M908 Wired MMO RGB Gaming Mouse 12400 DPI Remapping Keys

Redragon M908 Wired MMO RGB Gaming Mouse 12400 DPI Remapping Keys

A wired mouse with 18 programmable buttons, 5 DPI levels up to 12,400 DPI and smooth TEFLON feet pads, on a 6 ft braided cable.

View on Amazon
GravaStar Mercury M2 Wireless Gaming Mouse

GravaStar Mercury M2 Wireless Gaming Mouse

A wireless mouse with a hollowed-out design, 5 dynamic light modes and 5 programmable buttons, so cleaning needs care around the openings.

View on Amazon
Redragon M612 Wired RGB Optical Gaming Mouse 8000 DPI Remapping Keys

Redragon M612 Wired RGB Optical Gaming Mouse 8000 DPI Remapping Keys

A wired mouse with a skin-friendly frosted coating for fingerprint-free grip, 11 programmable buttons and 5 backlit modes.

View on Amazon

These come from our ranked list Best Mouse, which compares them spec by spec.

FAQ

Can I use rubbing alcohol on my mouse?

Yes, on the outside shell only. Dampen a cloth with a little rubbing alcohol and wipe the greasy spots, then wipe again with a dry cloth. Keep liquid out of the buttons, the scroll wheel, the sensor lens and any openings.

Can I wash a mouse under running water?

No. Water can get inside through the seams and damage the sensor and switches. Wipe it with a cloth that is barely damp, and never submerge the mouse or hold it under a tap.

Why does my mouse get greasy?

Skin oils, food and dust build up on the shell and buttons with use. Wiping it down when the surface starts to feel slick keeps the grip and the buttons working well.

How do I clean the scroll wheel?

Roll the wheel while you wipe it with a dry cloth, then work a dry cotton swab around its edges. If the wheel still feels sticky, wipe it with a cloth barely dampened with water and let it dry.

Ranked mice guides