How to Clean Dust From a Mouse
Turn the mouse off or unplug it, then wipe the outside with a dry, lint-free cloth to lift loose dust. For dust in the sensor opening, scroll wheel, and seams, use short bursts of air and a soft brush, then wipe again. Check the sensor and the feet before you plug the mouse back in and move it across the pad to confirm the cursor tracks smoothly.
Turn the mouse off first
Unplug a wired mouse or switch a wireless mouse off before you clean it, so clicks and movement do not open menus or move files while you work. If the mouse has a removable battery, take it out while you clean. Set the mouse on a clean, dry surface with good light, so you can see dust around the buttons, the scroll wheel, and the sensor opening on the underside. Keep liquids away from the mouse during the whole job.
Wipe the outside with a dry cloth
Wipe the top, sides, and buttons with a dry, lint-free cloth, using light pressure so dust lifts off instead of grinding into the finish. Work around each button and along the seams where dust collects, and fold the cloth to a clean face when one side picks up dust. For dust stuck in a seam, run a dry, soft brush along the gap, then wipe the area again. Do not use a wet cloth, and do not let any liquid reach the openings.
Clear the scroll wheel and sensor
Roll the scroll wheel slowly and brush dust from around it, then wipe the wheel with a dry cloth. Turn the mouse over and look at the sensor opening and the feet on the underside. Brush dust away from the sensor opening with a dry, soft brush, and wipe the feet with a dry cloth so dust does not drag across the pad. Do not press anything into the sensor opening, and do not scratch the lens or the feet with a hard tool.
Check the mouse before you use it
Put the battery back in a wireless mouse, switch it on, or plug a wired mouse back in. Move the mouse across the pad and watch the cursor for smooth, steady movement, and click each button and roll the wheel to check that each one responds. If dust remains around a button or the wheel, switch the mouse off again and repeat the wipe and brush steps. If the cursor still jumps or a button still sticks, contact the maker for help.
What you need

Logitech G305 LIGHTSPEED Wireless Gaming Mouse
A wireless mouse with a Hero 12K sensor, 12,000 DPI, six programmable buttons, and on-board memory for play on a PC or Mac.
View on Amazon
Redragon M908 Wired MMO RGB Gaming Mouse 12400 DPI Remapping Keys
A wired mouse with a Pixart PAW3327 sensor, 12,400 DPI, 18 programmable buttons, and a 1 year warranty.
View on Amazon
GravaStar Mercury M2 Wireless Gaming Mouse
A wireless mouse with a PAW3395DM sensor, 26,000 DPI, five programmable buttons, and a hollowed-out design with five dynamic light modes.
View on Amazon
Redragon M612 Wired RGB Optical Gaming Mouse 8000 DPI Remapping Keys
A wired mouse with an 8,000 DPI sensor, 11 programmable buttons, and a skin-friendly frosted coating on the grip.
View on AmazonThese come from our ranked list Best Mouse, which compares them spec by spec.
FAQ
How often should I clean my mouse?
Clean it when you see dust on the surface, when the wheel feels gritty, or when the cursor starts to move in jumps. A quick wipe after dusty work keeps dust from building up around the buttons and the sensor.
Can I use water to clean my mouse?
No. Water can reach the openings and damage the parts inside. Use a dry, lint-free cloth and a dry, soft brush, and keep the mouse away from sinks and drinks while you clean it.
Why does my mouse cursor jump after cleaning?
Dust or a cloth fiber may still sit on the sensor opening or on a foot. Switch the mouse off, brush the sensor opening again, wipe the feet, and move the mouse on a clean pad to check the cursor.




