Amazon Black Friday Week deals

Paid link

Monitors · How-to guide

How to Calibrate a Monitor

We earn a commission when you buy through our links, at no extra cost to you. As an Amazon Associate I earn from qualifying purchases.
Short answer

Calibrate a monitor by setting brightness, contrast and color temperature in the on-screen menu, then checking the result against a known image or a calibration tool. Use the monitor's own menu for the basic settings, and a colorimeter when you need a measured result. The steps below walk through the on-screen menu.

  1. Warm up the monitor first

    Turn the monitor on and leave it running for a while before you change any setting, so the panel reaches a stable state. Work in the room light you use most, since bright daylight and a dark room push the picture in different directions. Close other windows on the screen so only the settings menu and a plain image stay visible while you work.

  2. Set brightness and contrast

    Open the monitor's on-screen menu and find brightness and contrast. Raise brightness until a white page looks white without glare, then set contrast so dark and light areas stay distinct. If the monitor has an eco or energy mode, turn it off first, since it changes brightness on its own. Write down the values you pick so you can return to them later.

  3. Set color temperature and presets

    Pick a color temperature in the menu, such as warm, neutral or cool, and look at a photo you know well. The two Dell monitors list IPS panels with wide viewing angles, and the Acer lists 99% sRGB while the Sceptre lists 100% sRGB, so a photo with skin tones and green foliage shows shifts clearly. If the monitor has a preset for photo or video work, try it and compare it with the standard preset before you settle.

  4. Check the result and save it

    Look at the same photo and a plain white page after each change, and stop when skin tones look natural and text stays readable. If the monitor has a calibration preset, follow the steps in the maker's manual for that preset. Save the settings under a named profile if the menu offers one, so a reset does not lose the work.

What you need

Dell 24 Monitor SE2426H

Dell 24 Monitor SE2426H

A 23.8-inch IPS monitor with 1920x1080 resolution, 144Hz refresh, 1ms response, FreeSync and a 1-year warranty.

View on Amazon
Dell 27 Gaming Monitor SE2726HG

Dell 27 Gaming Monitor SE2726HG

A 27-inch IPS monitor with 1920x1080 resolution, 240Hz refresh, 0.5ms response, 99% sRGB and a 3-year warranty.

View on Amazon
Acer 23.8-inch Office Monitor KB242Y G0bi

Acer 23.8-inch Office Monitor KB242Y G0bi

A 23.8-inch IPS monitor with 1920x1080 resolution, 120Hz refresh, 1ms response, 99% sRGB and a 3-year warranty.

View on Amazon
Sceptre 24-inch Gaming Monitor 1ms E248W-FW100T

Sceptre 24-inch Gaming Monitor 1ms E248W-FW100T

A 24-inch monitor with 1920x1080 resolution, 100Hz refresh, 1ms response, 100% sRGB, built-in speakers and a limited 1-year warranty.

View on Amazon

These come from our ranked list Best PC with Monitor, which compares them spec by spec.

FAQ

How often should I calibrate my monitor?

Recalibrate when the picture looks off, after moving the monitor to different room light, or after a settings reset. Watch for skin tones that look wrong, whites that look yellow or blue, and dark areas that lose detail.

Do I need a colorimeter to calibrate a monitor?

No. The on-screen menu covers brightness, contrast and color temperature, which is enough for everyday work. A colorimeter adds a measured result, so it suits color work where the screen must match prints or other screens.

Why do colors look different on two monitors?

Each monitor ships with its own brightness, contrast and color settings, and panels differ in how they show color. The Acer lists 99% sRGB and the Sceptre lists 100% sRGB, so the same image can look different until both monitors are set the same way.

Ranked monitors guides