How to Assemble a Power Supply
Assembling a power supply means fitting it in the case and connecting its cables to the motherboard, processor and graphics card. Pick a supply that fits the case and has the connectors the parts take, and compare its wattage rating with the figures the parts list. Work with the PC shut down and unplugged, and follow the case and board manuals.
Pick a supply that fits the case
Check the case manual for the power supply size and mounting spot it takes, and check the board manual for the power connectors it takes. A supply lists its wattage rating and its cables, so compare those with the figures the graphics card and processor list. Check the graphics card manual for the power connector it takes, and check that the supply has that connector. A fully modular supply lets you connect only the cables the build takes.
Mount the supply in the case
Shut the PC down and unplug it first, and follow the case manual. Slide the supply into its bay at the bottom or top of the case, line up the screw holes and fasten the screws. Point the fan toward the vent or filter in the case so it draws in cool air. Never open the power supply unit itself: if it fails or makes a strange noise, unplug the PC and contact the maker.
Connect the cables to the parts
Start with the wide main power cable to the motherboard, then the CPU power cable to the socket near the processor. Connect the graphics card with the power cable its manual lists, and add power cables for drives and fans that take them. Push each connector in until it clicks, and check that the latch sits flat. With a fully modular supply, leave out the cables the build does not take.
Route the cables and check the build
Route each cable through the case cutouts and away from fans, then tie the slack so air can move through the case. Check every connector once more, plug the PC back in and switch the supply on at the back. Press the power button and watch that the fans spin and the screen shows the startup screen. If nothing happens, switch off, unplug and check each connector again.
What you need

CORSAIR RM1000e ATX 3.1 PCIe 5.1 Ready 1000W Power Supply
A 1000W fully modular supply with ATX 3.1 and PCIe 5.1, a native 12V-2x6 cable, a 120mm low-noise fan and a 7-year warranty.
View on Amazon
CORSAIR RM1000x ATX 3.1 PCIe 5.1 1000W Power Supply
A 1000W fully modular supply with ATX 3.1 and PCIe 5.1, a native 12V-2x6 connector and up to 91% efficiency.
View on Amazon
MSI MAG A850GL PCIE5
An 850W fully modular supply with 80 PLUS Gold, ATX 3.1 and PCIe 5.1, a native 12V-2x6 cable and a 10-year warranty.
View on Amazon
Thermaltake Toughpower GT 850W ATX 3.1 Standard Power Supply
An 850W fully modular supply with 80 Plus Gold, ATX 3.1 and PCIe 5.1, a native 12V-2x6 connector and flat black cables.
View on AmazonThese come from our ranked list Best Power Supply, which compares them spec by spec.
FAQ
Can I reuse the cables from my old power supply?
No. Cables differ between supply models, so use only the cables that came with the new supply. Mixing cables can damage parts, so check the supply manual for the cables it takes.
Which way should the supply fan face?
Face the fan toward the vent or filter in the case, so it draws in cool air. Check the case manual for the mounting spot, and keep the fan clear of cables and dust.
What if the PC does not turn on?
Switch the supply off and unplug the PC, then check that each connector sits flat and clicks in. Check the wall socket and the switch on the back of the supply, then try again.




