What Is JEDEC RAM?
JEDEC RAM is memory running at its JEDEC default profile, the speed a kit boots at with default BIOS settings. It only runs faster when you turn on an overclock profile such as XMP or EXPO. The kits below each list a rated speed reached through XMP or EXPO.
What the JEDEC default is
The JEDEC default profile is the standard speed and timing a memory kit uses out of the box. A kit boots at its JEDEC default SPD speed at default BIOS settings with compatible hardware, so it works before you change any setting. That default speed is the baseline the kit starts from, and the rated speed on the box sits above it.
What XMP and EXPO do
XMP and EXPO are overclock profiles for the memory kit. Turning one on in the BIOS runs the kit at its rated speed, such as the faster speed printed on the box. Without the profile, the kit stays at its JEDEC default speed. Check your motherboard manual for where to turn the profile on.
Match the kit to the board
Memory generation matters first: DDR5 kits fit DDR5 boards and DDR4 kits fit DDR4 boards, and the two do not mix. Check your motherboard manual for the generation, the kit size and the speeds it supports. Do not mix memory kits, since kits are sold in matched sets made to run together.
Read the rated speed with care
The speed on the box is the rated speed reached with an overclock profile, not the speed the kit boots at. A kit boots at its JEDEC default speed until you turn on XMP or EXPO in the BIOS. Check the requirements published for your software or game, and check the motherboard manual for the speeds it supports.
What you need

Patriot Viper Venom DDR5 RAM
A DDR5 16GB kit in 2x8GB with a 6000MT/s rated speed, CL36 timings, XMP 3.0 and EXPO support and on-die ECC.
View on Amazon
CORSAIR Vengeance RS DDR5
A DDR5 32GB kit in 2x16GB with up to 6000MHz, CL38 timings, AMD EXPO and Intel XMP 3.0 support and onboard voltage regulation.
View on Amazon
Corsair Vengeance RGB RS DDR5
A DDR5 64GB kit in 2x32GB with up to 6000MHz, CL40 timings, AMD EXPO and Intel XMP 3.0 support and addressable RGB lighting.
View on Amazon
G.SKILL RipjawsV DDR4 RAM (XMP)
A DDR4 32GB kit in 2x16GB with up to 3200MT/s, CL16 timings, a JEDEC default profile and an Intel XMP overclock profile.
View on AmazonThese come from our ranked list Best RAM for PC, which compares them spec by spec.
FAQ
Is JEDEC RAM slower than XMP RAM?
It runs at the default speed until you turn on an overclock profile. The same kit runs at its JEDEC default speed with default BIOS settings and at its rated speed with XMP or EXPO turned on.
Do I need to turn on XMP or EXPO?
Only if you want the rated speed on the box. Without the profile, the kit boots and runs at its JEDEC default speed. Check your motherboard manual for where to turn the profile on.
Can I mix a JEDEC kit with an XMP kit?
Do not mix memory kits. Kits are sold in matched sets made to run together, and mixing them can cause stability issues or system failure.


