What Does Soldered RAM Mean?
Soldered RAM means the memory chips are soldered straight onto the motherboard instead of sitting in slots on removable sticks. You cannot add or swap it later, so the amount you buy is the amount you keep. Desktop memory kits are the opposite: modules that fit into slots on the board.
Soldered means fixed to the board
Soldered RAM means the memory chips are soldered straight onto the motherboard, with no stick to pull out and no slot to fill. The memory becomes part of the board itself, so it stays where the maker put it. You see this design in thin laptops and compact machines, where there is no room for memory slots. When the memory is soldered, the amount in the machine is fixed at the factory.
What you cannot change later
With soldered RAM, the capacity you buy is the capacity you keep. There is no spare slot to add a stick to, and no module to swap for a larger one. If you want more memory later, the only path is a different machine. Before you buy, check the capacity in the maker's spec sheet and check the requirements published for the software you plan to run. A failed memory chip is a board repair, so contact the maker instead of opening the machine.
Socketed memory is the opposite
Socketed memory comes as modules that fit into slots on the board, and you can add or swap them. A desktop kit holds two matched modules that are made to run together as a set. The kits here are all desktop memory. The Patriot kit is two 8 GB DDR5 UDIMMs, and the Corsair kits are two-module DDR5 kits. The G.SKILL kit is two 16 GB DDR4 U-DIMMs. To fit a kit, shut the machine down, unplug it, and follow the steps in the maker's manual.
How to choose before you buy
Start with the machine, not the memory. Check the maker's spec sheet to see whether the memory is soldered or fitted in slots, and which generation the board takes, DDR4 or DDR5. A DDR5 kit does not fit a DDR4 board, and a DDR4 kit does not fit a DDR5 board. Then check the capacity shown in the spec sheet against the requirements published for your software. Buy the capacity you plan to keep, since soldered memory cannot change later.
What you need

Patriot Viper Venom DDR5 RAM
A 16 GB DDR5 kit of two 8 GB UDIMMs rated at 6000MT/s, with XMP 3.0 and EXPO overclocking support and on-die ECC.
View on Amazon
CORSAIR Vengeance RS DDR5
A 32 GB DDR5 kit of two 16 GB modules rated up to 6000MHz, with AMD EXPO and Intel XMP 3.0 profiles and onboard voltage regulation.
View on Amazon
Corsair Vengeance RGB RS DDR5
A 64 GB DDR5 kit of two 32 GB modules rated up to 6000MHz, with AMD EXPO and Intel XMP 3.0 profiles and addressable RGB lighting.
View on Amazon
G.SKILL RipjawsV DDR4 RAM (XMP)
A 32 GB DDR4 kit of two 16 GB U-DIMMs rated up to 3200MT/s, with a JEDEC default profile and an Intel XMP overclock profile.
View on AmazonThese come from our ranked list Best RAM for PC, which compares them spec by spec.
FAQ
Can I add more RAM to a laptop with soldered RAM?
No. Soldered memory is fixed to the board, so there is no slot to add a stick to. Check the maker's spec sheet before you buy, since the amount fitted is the amount you keep.
Is soldered RAM slower than socketed RAM?
Not by definition. Soldered memory can run at the speed the maker lists for the machine, just as a module runs at its rated speed. Compare the rated speed in the maker's spec sheet, and check the requirements published for your software.
Do the kits here use soldered RAM?
No. The four kits are desktop memory modules. The Patriot kit is two 8 GB DDR5 UDIMMs, and the Corsair kits are two-module DDR5 kits. The G.SKILL kit is two 16 GB DDR4 U-DIMMs.


