Amazon Black Friday Week deals

Paid link

PC Components · How-to guide

Which DDR RAM Should You Get?

We earn a commission when you buy through our links, at no extra cost to you. As an Amazon Associate I earn from qualifying purchases.
Short answer

Get DDR5 memory that matches your motherboard, in a matched kit, at the speed your board supports. The kits here are DDR5 in 16 GB, 32 GB and 64 GB sizes: Crucial at 5600 MHz, Patriot and G.SKILL at up to 6000 MT/s, and CORSAIR at up to 6000MHz. Check the memory type, the slot count and the speed your board takes before you buy.

  1. Match the generation to the board

    These kits are DDR5, so the motherboard must take DDR5 memory. Check the board manual for the generation it takes and the number of slots it has. A DDR5 kit goes in a DDR5 board, so check the board manual before you order. The Crucial and G.SKILL kits list 288-pin UDIMM modules, so check the form factor the board takes too.

  2. Pick the capacity and the kit

    Capacity is the size of the kit: the kits here come in 16 GB, 32 GB and 64 GB sizes, as two matched sticks. A matched kit is built to run as a set, so buy the kit size you want instead of adding a second kit later. The G.SKILL kit warns against mixing kits, since mixed kits can cause stability issues. Check the memory figure your software or game lists, then pick the kit size that covers it.

  3. Read the speed and the timings

    Rated speed is the figure the kit lists: the Crucial kit is rated at 5600 MHz, the Patriot and G.SKILL kits are rated up to 6000 MT/s, and the CORSAIR kit is rated up to 6000MHz. For the top speed, turn on the XMP or EXPO profile and make the BIOS adjustments the G.SKILL and CORSAIR kits state. Compare the CL number at the same speed: the Patriot and G.SKILL kits list CL36, and the CORSAIR kit lists CL38. The G.SKILL kit boots at the JEDEC default speed first, so check the speed in the BIOS after you fit it.

  4. Check the fit and the extras

    Check the kit fits the board and the case before you buy. The CORSAIR kit has dynamic RGB lighting, and the Patriot kit lists on-die ECC while the Crucial and G.SKILL kits list non-ECC. Shut the computer down and unplug it before you fit memory, and follow the maker's manual. Each kit here carries a limited lifetime warranty.

What you need

Crucial Pro

Crucial Pro

A 64 GB DDR5 kit of two 32 GB sticks rated at 5600 MHz, with a 288-pin UDIMM form factor and a limited lifetime warranty.

View on Amazon
Patriot Viper Venom DDR5 RAM

Patriot Viper Venom DDR5 RAM

A 16 GB DDR5 kit of two 8 GB sticks rated at 6000 MT/s, with CL36 timings, on-die ECC and XMP 3.0 and EXPO support.

View on Amazon
G.SKILL Flare X5 DDR5 RAM

G.SKILL Flare X5 DDR5 RAM

A 32 GB DDR5 kit of two 16 GB sticks rated up to 6000 MT/s, with CL36 timings and AMD EXPO and Intel XMP 3.0 profiles.

View on Amazon
CORSAIR VENGEANCE RGB RS DDR5

CORSAIR VENGEANCE RGB RS DDR5

A 32 GB DDR5 kit of two 16 GB sticks rated up to 6000 MHz, with CL38 timings, dynamic RGB lighting and onboard voltage regulation.

View on Amazon

These come from our ranked list Best Ddr Memory, which compares them spec by spec.

FAQ

Can I mix DDR4 and DDR5 memory?

No. DDR4 and DDR5 are different generations, so check the generation your motherboard takes and buy the matching generation. The kits here are all DDR5.

Do I need to turn on XMP or EXPO?

Yes, for the rated top speed. The G.SKILL and CORSAIR kits say the maximum speed needs overclocking or BIOS adjustments, so turn on the XMP or EXPO profile in the BIOS after fitting the kit.

Can I add a second RAM kit later?

Memory kits are sold as matched sets, and the G.SKILL kit warns against mixing kits, since mixed kits can cause stability issues. Buy the kit size you want from the start.

Ranked memory (ram) guides