How to Wire a Motherboard
Wiring a motherboard means connecting the power supply cables, the case front panel wires, the fans and the storage and USB headers to the right sockets on the board. Start with the power cables, then the front panel and fans, and check each connection against the board manual before you switch the power on. Shut the PC down and unplug it before you touch any cable inside the case.
Shut down and unplug first
Shut the PC down and unplug it from the wall before you open the case or touch a cable. Opening a desktop while it is plugged in risks damage to the board and to you, so work with the power fully off. Keep the board manual open beside you, since every board labels its sockets a little differently. If the PC is still under warranty, check the warranty terms before you open it.
Find the connectors on the board
Look for the wide main power socket along the right edge of the board, and the smaller CPU power socket near the processor socket. Find the front panel header along the bottom edge, where the power switch, reset switch and case lights connect. Fan headers sit near the edges of the board, and the storage and USB headers sit near the bottom and the right side. Match each cable to the socket shape and the socket name printed beside it on the board.
Connect the power cables first
Push the main power cable from the power supply into the wide socket until it sits flat and the latch holds it. Push the CPU power cable into its socket near the processor, and check the latch on both plugs. Cables only fit one way, so never force a plug that does not line up. If a plug will not seat, turn it around and check the shape against the socket before you try again.
Wire the front panel and fans
Connect the small front panel wires to the header along the bottom edge, matching each wire to the header pins for the power switch, reset switch and case lights. The power switch wire fits either way round, but the light wires need the right polarity, so check the manual if a light does not come on. Plug each case fan into a fan header on the board, and keep cables clear of the fan blades. Route cables so they do not press against the board.
Check every cable before power on
Go over each connection once more and push any loose plug in until its latch holds. Check that no cable rests on a fan blade or hangs near the processor cooler. Close the case, plug the PC back in and switch it on. If nothing happens, switch it off, unplug it and check the power cables and the front panel wires against the manual again.
What you need

ASUS ROG Strix B550-F Gaming
An ATX board with an AM4 socket, DDR4 memory, WiFi 6E, PCIe 4.0 and an HDMI 2.1 output for a Ryzen build.
View on Amazon
GIGABYTE B850 AORUS Elite WIFI7
An ATX board with an AM5 socket, DDR5 memory, PCIe 5.0, WiFi 7 and a 5-year warranty.
View on Amazon
GIGABYTE B550M K
A Micro-ATX board with an AM4 socket, DDR4 memory, PCIe 4.0 and two M.2 slots for a smaller build.
View on Amazon
MSI PRO B760-P
An ATX board with an LGA 1700 socket, DDR4 memory, WiFi 6E and 8-pin plus 4-pin CPU power connectors.
View on AmazonThese come from our ranked list Best Motherboard, which compares them spec by spec.
FAQ
Do I need to unplug the PC before wiring the motherboard?
Yes. Shut the PC down and unplug it before you open the case or touch a cable, and follow the steps in the board manual.
What if a power cable will not fit the socket?
Do not force it. Cables only fit one way, so check the shape of the plug against the socket and turn it around if it does not line up.
Where does the case power switch wire go?
It goes to the front panel header along the bottom edge of the board. Match the wire to the header pins for the power switch in the board manual.



