Amazon Black Friday Week deals

Paid link

PC Components · How-to guide

Motherboard Form Factors and Dimensions

We earn a commission when you buy through our links, at no extra cost to you. As an Amazon Associate I earn from qualifying purchases.
Short answer

A motherboard form factor is the standard size and mounting layout of a board. ATX is the full-size form factor, while Micro-ATX is a smaller board with fewer slots. The form factor decides which cases the board fits, where the mounting holes sit, and how much room the board leaves for cards and drives.

  1. What a form factor covers

    A form factor sets the board's size, the position of its mounting holes, the layout of the rear ports and the number of expansion slots. Boards that share a form factor use the same mounting pattern, so a case built for that form factor accepts them. The form factor also decides how much space is left inside the case once the board is fitted.

  2. ATX boards

    ATX is the full-size form factor and the common choice for a desktop build. An ATX board has room for several expansion slots and several M.2 slots, and its larger surface gives room for more ports and headers along the edges. Three of the boards in the list below are ATX boards, each with a different socket and chipset, so check the socket and memory generation before choosing one.

  3. Micro-ATX boards

    Micro-ATX is a smaller form factor with fewer expansion slots than ATX. It suits a compact case or a build that needs only one graphics card and a small number of add-in cards. The board still carries the same kinds of connections as a larger board, including memory slots, M.2 slots and USB ports, but with less room to spare around them.

  4. Check the case before you buy

    Read the case maker's spec sheet and look for the form factors it lists. A case that lists ATX accepts an ATX board, and a case that lists Micro-ATX accepts a Micro-ATX board. The mounting holes on the board must line up with the standoffs in the case, so check the list rather than guessing from the size of the case alone.

  5. Match the board to the build

    Form factor is only one part of the choice. Check that the socket matches the processor you plan to use, and check whether the board takes DDR4 or DDR5 memory. Then check the ports on the board against the devices you plan to connect, such as monitors, storage drives and USB devices, and confirm that the case has room for them.

What you need

ASUS ROG Strix B550-F Gaming

ASUS ROG Strix B550-F Gaming

An ATX board with an AM4 socket, B550 chipset, DDR4 memory, PCIe 4.0, WiFi 6E and HDMI 2.1 output.

View on Amazon
GIGABYTE B850 AORUS Elite WIFI7

GIGABYTE B850 AORUS Elite WIFI7

An ATX board with an AM5 socket, B850 chipset, DDR5 memory, PCIe 5.0, three M.2 slots and WiFi 7.

View on Amazon
GIGABYTE B550M K

GIGABYTE B550M K

A Micro-ATX board with an AM4 socket, B550 chipset, DDR4 memory, PCIe 4.0 and two M.2 slots.

View on Amazon
MSI PRO B760-P

MSI PRO B760-P

An ATX board with an LGA 1700 socket, B760 chipset, DDR4 memory, PCIe 4.0, Wi-Fi 6E and Bluetooth 5.3.

View on Amazon

These come from our ranked list Best Motherboard, which compares them spec by spec.

FAQ

What is the difference between ATX and Micro-ATX?

ATX is the larger, full-size board with more expansion slots, while Micro-ATX is smaller and has fewer slots. Both use the same kinds of connections, so the choice comes down to case size and how many cards you plan to fit.

Can a Micro-ATX board fit in an ATX case?

A case that lists Micro-ATX support accepts the smaller board, since the mounting holes line up with the ATX pattern. Check the case maker's spec sheet for the form factors it lists before buying.

Does form factor change how fast a PC runs?

No. The size of the board does not set its speed. What matters is the chipset, the processor, the memory generation and the storage, so compare those specs when you choose a board.

Ranked motherboards guides