How to Test Monitor Color Accuracy
You check a monitor's color accuracy by comparing what it shows against a known reference, then adjusting its settings until the two match. You can also compare your screen with a reference photo or a second display, though that shows differences without measuring them exactly.
Warm up the monitor first
Let the monitor run for a while before you judge its colors, since a cold panel shows different colors than one at its working state. Open a plain white page and a photo with skin tones, grass and sky, and look at them under the room light you work in. Set the monitor to its standard or sRGB picture mode if it has one, and turn off any night mode or blue light filter that shifts colors toward yellow. Write down the settings you start from, so you can return to them.
Compare the screen with a reference
Open the same photo on your monitor and on a device you trust, such as a phone or a second display, and place them side by side in the same light. Look at skin tones first, then reds, greens and blues, and note where your monitor runs warm, cool, bright or dull next to the reference. A reference photo with a gray card or a color chart helps, since gray shows a color cast at once. If the same photo looks different on the two screens, one of them needs adjustment.
Measure the screen with a colorimeter
A colorimeter is a small sensor that rests on the screen while its software shows a series of color patches and reads what the panel displays. The software then builds a profile that tells your computer how to correct the colors, and it reports how far the screen sits from the sRGB color space. Follow the software prompts for screen type and white point, keep the room light steady, and let the run finish without moving the sensor. Repeat the measurement after you change a setting, so you can see whether the change helped.
Adjust the monitor settings
Start with brightness, then contrast, then the color temperature or the red, green and blue gains in the monitor menu. Change one control at a time and look at the same photo after each change, so you know which control moved the picture. If the monitor has an sRGB mode, try it before you adjust the gains by hand, since it sets the color range for you. Save the settings you settle on, and check the screen again after a break, since your eyes adjust to a new picture and a fresh look catches what you missed.
Check the result on real photos
Finish by opening photos you know well: portraits, landscapes and product shots with colors you remember. Skin should look natural, not orange or gray, and white areas should look white, not yellow or blue. If one color still stands out, go back to the gains for that color and move it in small steps. When the same photos look right on your monitor and on your reference device, the screen is set for the work you do on it.
What you need

Dell 24 Monitor SE2426H
A 23.8-inch 1920x1080 IPS display with a 144Hz refresh rate and a 178° viewing angle, so colors stay steady when you shift position.
View on Amazon
Dell 27 Gaming Monitor SE2726HG
A 27-inch 1920x1080 IPS display with a 240Hz refresh rate and 99% sRGB color coverage for color work.
View on Amazon
Acer 23.8-inch Office Monitor KB242Y G0bi
A 23.8-inch 1920x1080 IPS display with a 120Hz refresh rate, 99% sRGB coverage and a blue light filter.
View on Amazon
Sceptre 24-inch Gaming Monitor 1ms E248W-FW100T
A 24-inch 1920x1080 display with a 100Hz refresh rate, 100% sRGB color gamut and built-in speakers.
View on AmazonThese come from our ranked list Best PC with Monitor, which compares them spec by spec.
FAQ
Can I check color accuracy without a colorimeter?
Yes. Compare the same photo on your monitor and on a device you trust, and look for shifts in skin tones and grays. That shows whether your screen runs warm or cool, though it does not give you a measured figure for the difference.
What is an sRGB mode on a monitor?
It is a picture mode that sets the monitor to the sRGB color range, the range used by photos and web pages. It gives you a known starting point before you adjust brightness, contrast or the color gains by hand.
How often should I check my monitor colors?
Check them when the picture starts to look different, after you move the monitor to new light, or after a settings reset. A colorimeter profile can drift as the panel ages, so a fresh measurement after a change keeps the screen honest.



