How to Set Up a Dual Monitor Stand
Clamp the dual monitor stand to the desk, attach both monitors to its arms, connect each monitor to the computer with HDMI or DisplayPort, then arrange the screens in your display settings. The four monitors here all run 1920x1080, with refresh rates from 100Hz to 240Hz and weights from 5.8 lb to 8.2 lb.
Check the stand and the desk
Start with the desk and the stand. The stand clamps to the desk edge or bolts through a hole, so check that the desk edge is solid and thick enough for the clamp. Check the back of each monitor for its mount: the Acer KB242Y G0bi and the Sceptre E248W-FW100T are VESA mountable. Read the stand manual for the screws and the order of assembly before you lift a monitor.
Attach both monitors to the arms
Attach the VESA plate to the back of the first monitor with the screws from the stand kit, then lift the monitor onto the arm and lock it in place. Do the same for the second monitor. Tighten every screw before you let go of a monitor, and check that each monitor sits level on its arm. If an arm sags or drifts, tighten its joint and check the tilt again.
Connect power and video cables
Connect each monitor to the computer with its own cable. The Dell SE2426H has 2X HDMI, and the Acer KB242Y G0bi has HDMI and VGA. The Dell SE2726HG has 2X HDMI and DisplayPort 1.4, and the Sceptre E248W-FW100T has DisplayPort and two HDMI 2.0 ports. Plug in the power cable for each monitor, then switch both monitors on and check that each shows a picture. If a monitor stays blank, check the cable at both ends.
Arrange the screens and adjust tilt
Open the display settings on the computer and drag the screens into the order they sit on the desk. Set the main monitor, then set each screen to 1920x1080, the resolution all four monitors here share. Adjust the tilt on the Dell monitors and the height of each arm until the screens sit level. Save the arrangement, then move the mouse across both screens to check the order.
What you need

Dell 24 Monitor SE2426H
A 23.8-inch IPS monitor at 1920x1080 and 144Hz with 2X HDMI, a 1ms response and a 7.43 lb weight.
View on Amazon
Dell 27 Gaming Monitor SE2726HG
A 27-inch IPS monitor at 1920x1080 and 240Hz with 2X HDMI, DisplayPort 1.4 and a 0.5ms response.
View on Amazon
Acer 23.8-inch Office Monitor KB242Y G0bi
A 23.8-inch IPS monitor at 1920x1080 and 120Hz with HDMI, VGA, VESA mounting and a 1ms response.
View on Amazon
Sceptre 24-inch Gaming Monitor 1ms E248W-FW100T
A 24-inch monitor at 1920x1080 and 100Hz with DisplayPort, two HDMI 2.0 ports, built-in speakers and VESA mounting.
View on AmazonThese come from our ranked list Best PC with Monitor, which compares them spec by spec.
FAQ
Can I mix two different monitors on one stand?
Yes. The monitors here range from 23.8 inches to 27 inches and 5.8 lb to 8.2 lb, so check that the stand arms hold both sizes and weights. Match the resolution where you can: all four monitors here run 1920x1080.
Which cable connects a monitor to a computer?
HDMI, DisplayPort or VGA. The Dell SE2426H has 2X HDMI, and the Acer has HDMI and VGA. The Dell SE2726HG has 2X HDMI and DisplayPort 1.4, and the Sceptre has DisplayPort and two HDMI 2.0 ports. Use the cable that fits the ports on your monitor and computer.
Do I need a VESA mount for a dual monitor stand?
The stand arms attach to the VESA mount on the back of the monitor. The Acer KB242Y G0bi and the Sceptre E248W-FW100T are VESA mountable, so check the mount on your monitor before you buy a stand.




