How to Set Up a Monitor Stand
To set up a monitor stand, assemble the stand, attach the monitor to its mount, set the stand on the desk, connect the video and power cables, then adjust the height and tilt. Check that the stand fits the monitor's mount and weight before you start, and follow the stand's own manual for the exact steps. The four monitors below all have HDMI ports for the video cable.
Check the mount and the weight first
Before you buy or build anything, check that the stand fits the monitor. The Acer KB242Y and the Sceptre E248W list VESA mounting, so a VESA stand or arm fits them. Then check the stand's weight limit against the monitor: the Sceptre weighs 5.8 lb, the Dell SE2426H weighs 7.43 lb, the Acer weighs 7.72 lb and the Dell SE2726HG weighs 8.2 lb. A stand rated below the monitor's weight is the wrong stand.
Assemble the stand on the desk
Lay the parts out on the desk and follow the stand's manual in order. Tighten the screws by hand first, then snug them down once the stand sits flat and steady. Keep the screws and small parts in one pile so none roll off the desk. Do not put the monitor on the stand until the base is fully assembled and the stand no longer wobbles.
Attach the monitor to the stand
Lay the monitor face down on a soft cloth on the desk, then line up the mount on the back of the monitor with the plate on the stand. Fasten it with the screws the stand provides, following the stand's manual. Lift the monitor by its frame, not by the screen, and set the stand upright on the desk. Check that the monitor sits level and does not lean.
Connect the cables
Connect a video cable from the monitor to the computer. All four monitors here have HDMI ports, and the Dell SE2726HG and the Sceptre E248W also have DisplayPort. Plug the power cable into the monitor and the wall outlet, then switch the monitor on. Open the display settings on the computer and set the resolution to 1920x1080, which all four monitors list.
Adjust height, tilt and cables
Adjust the height and tilt until the screen faces you and the picture looks even from your seat. The Dell SE2426H and the Dell SE2726HG both list tilt, so their screens angle up and down. Route the cables behind the stand so they do not pull on the ports, and leave enough slack to tilt the screen. Switch the monitor off and back on if the picture does not appear, and check that the cable sits fully in its port.
What you need

Dell 24 Monitor SE2426H
A 23.8-inch 1920x1080 IPS monitor with a 144Hz refresh rate, 1ms response, two HDMI ports and tilt.
View on Amazon
Dell 27 Gaming Monitor SE2726HG
A 27-inch 1920x1080 IPS monitor with a 240Hz refresh rate, 0.5ms response, DisplayPort 1.4, two HDMI ports and tilt.
View on Amazon
Acer 23.8-inch Office Monitor KB242Y G0bi
A 23.8-inch 1920x1080 IPS monitor with a 120Hz refresh rate, 1ms response, HDMI, VGA and VESA mounting.
View on Amazon
Sceptre 24-inch Gaming Monitor 1ms E248W-FW100T
A 24-inch 1920x1080 monitor with a 100Hz refresh rate, 1ms response, DisplayPort, two HDMI ports, built-in speakers and VESA mounting.
View on AmazonThese come from our ranked list Best PC with Monitor, which compares them spec by spec.
FAQ
Do I need tools to set up a monitor stand?
The stand's manual lists the screws and tools the stand needs, so read it before you start. Keep the screws the stand provides in one place while you work, and do not force a screw that will not turn.
Can I mount these monitors on a wall?
The Acer KB242Y and the Sceptre E248W list VESA mounting, so they fit a VESA wall mount. For the Dell SE2426H and the Dell SE2726HG, check the stand or mount against the monitor's own manual before buying.
What cable connects these monitors to a computer?
HDMI works with all four monitors here, and the Dell SE2726HG and the Sceptre E248W also have DisplayPort. Pick the cable that matches a port on both the monitor and the computer, and check that the cable sits fully in its port.



