Amazon Black Friday Week deals

Paid link

Monitors · How-to guide

How to Remove a Monitor Stand

We earn a commission when you buy through our links, at no extra cost to you. As an Amazon Associate I earn from qualifying purchases.
Short answer

To remove a monitor stand, switch the monitor off and unplug the power and video cables, lay the screen face down on a soft cloth, find the release button or the screws where the stand meets the back of the monitor, and lift the stand away. The exact release differs by model, so check the manual for your monitor before you pull or twist anything.

  1. Unplug everything first

    Switch the monitor off with its power button, then unplug the power cable and the video and USB cables from the back. Cables pull tight when you move the monitor, and a cable left plugged in can drag the screen off the table. Set the cables aside where they will not snag, and leave the monitor off until the stand is back on or the mount is fitted.

  2. Lay the screen face down

    Put a folded towel or a soft cloth on a flat table, then lay the monitor face down on it so the screen rests on the cloth and the stand points up. A bare table can scratch the screen, and a cloth also stops the monitor sliding while you work. Keep the screen flat and steady, and do not rest anything on the back of the monitor.

  3. Find the release or the screws

    Look where the stand arm meets the back of the monitor for a release button, a latch or a small lever, and press or slide it as the manual shows. If there is no release, look for screws around the joint and remove them with a screwdriver that fits the heads. Keep the screws in a small dish so none roll away, and never force the joint if it will not move.

  4. Lift the stand away

    Hold the monitor steady and lift the stand arm straight out of its slot, or slide it down and off after the screws are out. Set the stand and its screws aside together so you can refit them later. If the arm sticks, check again for a hidden screw or a latch you missed instead of pulling harder.

  5. Fit a mount or refit the stand

    To hang the monitor on an arm or a wall mount, line up the mount plate with the holes on the back of the monitor and fasten it with the screws that came with the mount. To put the stand back, slide the arm into its slot until it clicks, or refit the screws and check that the arm holds firm. Check that the monitor sits level and steady before you plug the cables back in.

What you need

Dell 24 Monitor SE2426H

Dell 24 Monitor SE2426H

A 23.8-inch IPS monitor with 1920x1080 resolution, a 144Hz refresh rate, HDMI and a 1-year warranty.

View on Amazon
Dell 27 Gaming Monitor SE2726HG

Dell 27 Gaming Monitor SE2726HG

A 27-inch IPS monitor with 1920x1080 resolution, a 240Hz refresh rate, HDMI, DisplayPort and a 3-year warranty.

View on Amazon
Acer 23.8-inch Office Monitor KB242Y G0bi

Acer 23.8-inch Office Monitor KB242Y G0bi

A 23.8-inch IPS monitor with 1920x1080 resolution, a 120Hz refresh rate, HDMI, VGA and VESA mounting.

View on Amazon
Sceptre 24-inch Gaming Monitor 1ms E248W-FW100T

Sceptre 24-inch Gaming Monitor 1ms E248W-FW100T

A 24-inch monitor with 1920x1080 resolution, a 100Hz refresh rate, HDMI, DisplayPort, built-in speakers and VESA mounting.

View on Amazon

These come from our ranked list Best PC with Monitor, which compares them spec by spec.

FAQ

Do I need tools to remove a monitor stand?

Some stands release with a button or a latch and need no tools, while others are held by screws that need a screwdriver. Check the manual for your monitor model to see which type it uses before you start.

Can I put the stand back on later?

Yes. Keep the stand and its screws together, then slide the arm back into its slot or refit the screws. Check that the arm holds firm and the monitor sits level before you use it again.

What if the stand will not come off?

Stop and look again for a hidden screw, a latch or a lock near the joint, and check the manual for the release step. Do not force the arm, since forcing it can crack the case or bend the mount, and contact the maker if the manual gives no release.

Ranked monitors guides