Amazon Black Friday Week deals

Paid link

PC Components · How-to guide

How to Put RAM in Dual Channel

We earn a commission when you buy through our links, at no extra cost to you. As an Amazon Associate I earn from qualifying purchases.
Short answer

Put two matched sticks in the second and fourth slots from the CPU, or in the slots the motherboard manual names. With the sticks in the right slots, the memory runs in dual channel. Shut the PC down and unplug it before you open the case, and follow the manual for your board.

  1. Use a matched pair

    Dual channel needs two sticks that match. Buy them as one kit, with the same capacity, speed and generation, so both sticks run together. The kits here come as two sticks, such as 16 GB, 32 GB and 64 GB DDR5 kits and a 32 GB DDR4 kit. Do not mix memory kits: mixing can cause stability issues or system failure. Match the generation to your board: a DDR5 board takes DDR5, and a DDR4 board takes DDR4.

  2. Find the matching slots

    The motherboard manual names the slots for dual channel. On a board with four slots, the pair goes in the second and fourth slots from the CPU. If the manual names other slots, follow the manual. Putting both sticks side by side in the first two slots leaves the memory in single channel, so check the manual before you install.

  3. Shut down and unplug first

    Shut the PC down and unplug it before you open the case. Touch a bare metal part of the case to discharge static before you handle the sticks, and hold each stick by its edges. Keep the sticks in their packaging until you are ready to install them, and follow the steps in your motherboard manual.

  4. Seat the sticks and check

    Open the clips at each end of a slot, line up the notch on the stick with the key in the slot, and press the stick down evenly until the clips close around it. Repeat for the second stick in its matching slot. Then plug the PC back in, switch it on, and check the memory section of the BIOS or the system information to confirm the channel mode shows dual channel.

What you need

Patriot Viper Venom DDR5 RAM

Patriot Viper Venom DDR5 RAM

A DDR5 kit of 16 GB in two 8 GB sticks at 6000 MT/s, with XMP 3.0 and EXPO support and on-die ECC.

View on Amazon
CORSAIR Vengeance RS DDR5

CORSAIR Vengeance RS DDR5

A DDR5 kit of 32 GB in two 16 GB sticks at up to 6000 MHz, with AMD EXPO and Intel XMP 3.0 profiles.

View on Amazon
Corsair Vengeance RGB RS DDR5

Corsair Vengeance RGB RS DDR5

A DDR5 kit of 64 GB in two 32 GB sticks at up to 6000 MHz, with AMD EXPO and Intel XMP 3.0 profiles and RGB lighting.

View on Amazon
G.SKILL RipjawsV DDR4 RAM (XMP)

G.SKILL RipjawsV DDR4 RAM (XMP)

A DDR4 kit of 32 GB in two 16 GB sticks at up to 3200 MT/s, with an Intel XMP profile and a JEDEC default profile.

View on Amazon

These come from our ranked list Best RAM for PC, which compares them spec by spec.

FAQ

Can I mix two different RAM kits?

Use two sticks from one matched kit. Mixing kits can cause stability issues or system failure, so buy the pair as one kit.

How do I check that dual channel is working?

Open the memory section of the BIOS or the system information on your PC and look for the channel mode. If it shows single channel, shut the PC down, unplug it and move the sticks to the matching slots the manual names.

Can one RAM stick run in dual channel?

No. Dual channel needs two sticks, one in each channel. With one stick the memory runs in single channel.

Ranked memory (ram) guides