Amazon Black Friday Week deals

Paid link

PC Components · How-to guide

How to Connect a Power LED on a Motherboard

We earn a commission when you buy through our links, at no extra cost to you. As an Amazon Associate I earn from qualifying purchases.
Short answer

You connect a power LED by pushing the case's two-pin PLED lead onto the matching pins of the motherboard front panel header, with the positive wire on the pin marked plus. The header location and pin layout differ by board, so the motherboard manual diagram is the map you follow for your exact model.

  1. Shut down and unplug the PC

    Shut the computer down, switch the power supply off and unplug the power cable before you open the case. Follow the maker's manual for your motherboard and case. Work with the side panel off and the front panel leads in reach, and keep the manual open at the front panel header diagram while you work.

  2. Find the front panel header

    Look for the front panel header, a small group of pins near the edge of the board, often near the front of the case. The manual labels each pin pair for the power switch, reset switch, power LED and drive activity LED. Find the pair marked PLED or PWR LED in the diagram, and note which pin is marked plus and which is marked minus.

  3. Match the LED polarity

    An LED only lights in one direction, so polarity matters. The case lead for the power LED has two wires, and the plug is often marked with a plus sign or a small triangle for the positive side. A colored wire is the positive wire on many cases, and a white or black wire is the negative wire, but check the case manual rather than guessing from color alone.

  4. Push the connector on

    Align the PLED plug with the PLED pins in the manual diagram, positive wire to the plus pin, and push it straight down until it seats. Keep the power switch and reset leads on their own pins, since those switches work in either direction but the LED does not. Route the leads so they do not touch fan blades or sit under the side panel edge.

  5. Power on and check the light

    Plug the power cable back in, switch the power supply on and press the case power button. The power LED should light while the PC runs. If it stays dark, shut down, unplug the cable and turn the PLED plug around on the same two pins, then check again. If the light still stays dark, recheck the manual diagram for the correct pin pair.

What you need

ASUS ROG Strix B550-F Gaming

ASUS ROG Strix B550-F Gaming

An ATX AM4 motherboard with DDR4, PCIe 4.0, WiFi 6E and 2.5Gb LAN for Ryzen builds.

View on Amazon
GIGABYTE B850 AORUS Elite WIFI7

GIGABYTE B850 AORUS Elite WIFI7

An ATX AM5 motherboard with DDR5, PCIe 5.0, 3 M.2 slots and WiFi 7 support.

View on Amazon
GIGABYTE B550M K

GIGABYTE B550M K

A Micro-ATX AM4 motherboard with DDR4, PCIe 4.0 and 2 M.2 slots for compact builds.

View on Amazon
MSI PRO B760-P

MSI PRO B760-P

An ATX LGA 1700 motherboard with DDR4, PCIe 4.0, Wi-Fi 6E and Bluetooth 5.3.

View on Amazon

These come from our ranked list Best Motherboard, which compares them spec by spec.

FAQ

What happens if the power LED is reversed?

The LED stays dark, since it only lights with the positive wire on the plus pin. Shut down, unplug the PC and turn the plug around on the same PLED pins, then power on again.

Where is the power LED header on a motherboard?

It sits in the front panel header near the edge of the board. The exact pin pair differs by model, so follow the front panel diagram in your motherboard manual and look for the pins marked PLED.

Can I leave the power LED unplugged?

Yes. The power LED only shows that the PC is on, and the power switch works without it. Many builders leave it off for a dark room, and the PC runs the same either way.

Is the power LED the same as the drive LED?

No. The power LED lights while the PC runs, and the drive activity LED flickers with storage activity. They use separate pin pairs on the front panel header, so match each lead to its own labeled pins.

Ranked motherboards guides