Amazon Black Friday Week deals

Paid link

PC Components · How-to guide

How to Mount a Motherboard to a PC Case

We earn a commission when you buy through our links, at no extra cost to you. As an Amazon Associate I earn from qualifying purchases.
Short answer

To mount a motherboard, shut the PC down, unplug it and open the case. Fit standoffs in the tray holes that line up with the board, fit the I/O shield in the rear opening, then lower the board onto the standoffs and fasten it with screws. Follow the manuals for the board and the case at each step.

  1. Shut down and open the case

    Shut the PC down and unplug the power cable. Open the side panel and lay the case on its side on a flat surface with the motherboard tray facing up. Keep the board in its box until you need it, and touch the metal case frame from time to time to discharge static.

  2. Match the board to the case

    Check that the case supports the board's form factor. An ATX board needs a tray that lists ATX, while a Micro-ATX board fits trays that list Micro-ATX. Read the case manual for the form factors it supports and for the standoff positions that match the board. The case fits the board when the tray's hole pattern lines up with it.

  3. Fit the standoffs and I/O shield

    Screw a standoff into each tray hole that lines up with a mounting hole on the board. Each standoff should sit directly under a mounting hole, since a standoff under the board's surface can touch the board's circuits. Push the I/O shield into the rear opening from inside the case before the board goes in, since it cannot be fitted afterwards.

  4. Lower the board and fasten it

    Hold the board by its edges and lower it onto the standoffs, guiding the rear ports through the I/O shield. Line up each mounting hole with the standoff below it. Put a screw in each hole and tighten it until snug, working across the board so it stays flat. Do not force a screw that will not turn.

  5. Connect power and check the fit

    Connect the main power cable and the CPU power cable from the power supply to the board, following the board manual for their positions. Check that the board sits flat on the standoffs, that no cable rests on a fan, and that the rear ports sit square in the I/O shield. Close the case only after the board is secure.

What you need

ASUS ROG Strix B550-F Gaming

ASUS ROG Strix B550-F Gaming

An ATX board for AM4 Ryzen processors with DDR4 memory, PCIe 4.0, WiFi 6E and HDMI 2.1 output.

View on Amazon
GIGABYTE B850 AORUS Elite WIFI7

GIGABYTE B850 AORUS Elite WIFI7

An ATX board for AM5 Ryzen processors with DDR5 memory, PCIe 5.0, three M.2 slots and WiFi 7.

View on Amazon
GIGABYTE B550M K

GIGABYTE B550M K

A Micro-ATX board for AM4 Ryzen processors with DDR4 memory, PCIe 4.0 and two M.2 slots.

View on Amazon
MSI PRO B760-P

MSI PRO B760-P

An ATX board for 12th, 13th and 14th Gen Intel processors with DDR4 memory, PCIe 4.0 and Wi-Fi 6E.

View on Amazon

These come from our ranked list Best Motherboard, which compares them spec by spec.

FAQ

Do I need a standoff under every mounting hole?

Yes. Every mounting hole on the board should sit on a standoff, and each standoff should sit directly under a mounting hole, since a spare standoff under the board can short it. Check the case manual for the standoff layout for your board's form factor.

Which way does the board face in the case?

The rear ports face the I/O opening at the back of the case, with the memory slots and CPU socket toward the top. Fit the I/O shield first, then lower the board so the ports pass through it.

How tight should the mounting screws be?

Snug, not forced. Tighten each screw until the board sits flat and does not move, then stop. Overtightening can crack the board or strip the standoff.

Ranked motherboards guides