How to Mount a Monitor on a Stand
Mount a monitor on its stand by fitting the stand neck to the back of the monitor, fixing the base to the neck, and standing the whole unit on your desk. The neck slots or screws into place, and the monitor then tilts to face you. Work on a clear desk with the screen face down on a soft cloth while you fit the parts.
Check the parts before you start
Set the monitor, stand neck, base and screws on a clear desk so you can see every part before you begin. Read the quick-start sheet or manual that came with your monitor for the order of the steps and the screw positions for your model. Keep the screws in a small dish so none roll away, and keep the power and video cables nearby for later.
Lay the monitor face down
Put a soft cloth or towel on a flat surface, then lay the monitor face down on it with the back facing up. The cloth keeps the screen from picking up scratches while you work on the back. Make sure the monitor sits flat and steady and that the bottom edge, where the stand fits, is easy to reach.
Fit the stand neck to the monitor
Line up the stand neck with the slot or screw holes on the back of the monitor and push it in until it sits flush. If the neck uses screws, drive them in by hand first, then tighten them with a screwdriver so the neck holds firm. Give the neck a gentle pull to check that it is locked in place before you move on.
Fix the base and stand it up
Slide or screw the base onto the bottom of the stand neck and tighten the screw underneath until the base sits flat. Lift the monitor by the sides, not by the screen, and set it upright on your desk. Check that the base sits flat on the desk and that the monitor stands steady before you let go.
Connect the cables and set the angle
Plug the power cable into the monitor and the wall, then connect a video cable from the monitor to your computer. Use HDMI or DisplayPort if your monitor and computer both have that port. Tilt the screen up or down until it faces you straight on, then tidy the cables behind the stand so they stay out of the way.
What you need

Dell 24 Monitor SE2426H
A 23.8-inch 1920x1080 IPS monitor with a 144Hz refresh rate, two HDMI ports and tilt adjustment for the stand.
View on Amazon
Dell 27 Gaming Monitor SE2726HG
A 27-inch 1920x1080 IPS monitor with a 240Hz refresh rate, two HDMI ports, DisplayPort 1.4 and tilt adjustment.
View on Amazon
Acer 23.8-inch Office Monitor KB242Y G0bi
A 23.8-inch 1920x1080 IPS monitor with a 120Hz refresh rate, HDMI and VGA ports, and VESA mounting.
View on Amazon
Sceptre 24-inch Gaming Monitor 1ms E248W-FW100T
A 24-inch 1920x1080 monitor with a 100Hz refresh rate, DisplayPort and two HDMI ports, built-in speakers and VESA wall mounting.
View on AmazonThese come from our ranked list Best PC with Monitor, which compares them spec by spec.
FAQ
Do I need tools to mount a monitor on its stand?
Some stands slot together by hand, while others need a screwdriver for the screws. Check the manual that came with your monitor for the tools it lists, and keep a screwdriver nearby before you start.
What if the stand does not fit my monitor?
Check that the neck lines up with the slot or screw holes on the back of your monitor and that you have the right base for your model. If the parts do not line up, stop and read the manual for your monitor before forcing anything.
Can I mount my monitor on a VESA stand instead?
Yes, if your monitor has VESA mounting holes on the back and the stand matches them. The Acer KB242Y G0bi is listed as VESA mountable, and the Sceptre E248W-FW100T is listed as VESA wall mountable. Check the hole pattern your stand needs against the monitor before you buy the stand.



