Amazon Black Friday Week deals

Paid link

Monitors · How-to guide

How to Make a Monitor Vertical Without a Stand

We earn a commission when you buy through our links, at no extra cost to you. As an Amazon Associate I earn from qualifying purchases.
Short answer

To make a monitor vertical without its stand, mount it on a VESA wall mount or monitor arm that turns to portrait, then set the display orientation to portrait in your system settings. The Acer monitor is listed as VESA mountable and the Sceptre monitor as VESA wall mountable, so those two take a VESA mount. A stand that only tilts cannot turn the screen vertical.

  1. Check for a VESA mount first

    A monitor goes vertical without its stand when it has a VESA mount pattern on the back, which is where a wall mount or monitor arm screws on. The Acer monitor is listed as VESA mountable and the Sceptre monitor is listed as VESA wall mountable, so a VESA mount fits those two. Check the manual for your monitor for a VESA mount pattern before you buy a mount, and check the mount's stated screen size and weight limits against your monitor.

  2. Pick a mount that turns to portrait

    Not every wall mount turns, so pick one that rotates the screen to portrait and locks in place. A monitor arm that rotates lets you switch between landscape and portrait without taking the monitor off the mount. Check that the mount fits your screen size: the monitors here run from 23.8 inches to 27 inches, so check the mount's stated size range against your monitor before you order.

  3. Turn the picture to portrait in settings

    Once the monitor hangs vertical, turn the picture to match. Open the display settings on your computer and set the orientation to portrait, so menus and windows run top to bottom instead of side to side. If the picture stays sideways, the orientation is still set to landscape, so open the settings again and change it. The picture and the screen should agree before you start work.

  4. Check the cables after the turn

    A turned monitor can pull its cables tight, so check that each cable reaches with slack to spare. All four monitors here list HDMI, and the Dell 27 and the Sceptre also list DisplayPort, so use the port your computer and monitor share. If a cable is too short, swap it for a longer one of the same type before you settle the monitor in place.

What you need

Dell 24 Monitor SE2426H

Dell 24 Monitor SE2426H

A 23.8-inch FHD monitor with a 144Hz refresh rate, IPS panel and 2 HDMI ports, with a tilt stand.

View on Amazon
Dell 27 Gaming Monitor SE2726HG

Dell 27 Gaming Monitor SE2726HG

A 27-inch FHD monitor with a 240Hz refresh rate, IPS panel, HDMI and DisplayPort 1.4, with a tilt stand.

View on Amazon
Acer 23.8-inch Office Monitor KB242Y G0bi

Acer 23.8-inch Office Monitor KB242Y G0bi

A 23.8-inch FHD IPS monitor with a 120Hz refresh rate, HDMI and VGA, and a VESA mount.

View on Amazon
Sceptre 24-inch Gaming Monitor 1ms E248W-FW100T

Sceptre 24-inch Gaming Monitor 1ms E248W-FW100T

A 24-inch FHD monitor with a 100Hz refresh rate, DisplayPort and 2 HDMI ports, built-in speakers and a VESA wall mount.

View on Amazon

These come from our ranked list Best PC with Monitor, which compares them spec by spec.

FAQ

Can any monitor go vertical?

No. The monitor needs a VESA mount pattern and a mount that turns to portrait. The Acer and Sceptre monitors here list VESA mounting, so those two take a VESA mount.

Do I need a special cable for a vertical monitor?

No. The same HDMI or DisplayPort cable carries the picture in portrait and in landscape. Check that the cable is long enough to reach the turned monitor with slack to spare.

Will the picture stay sharp when the monitor turns?

The resolution stays the same when the screen turns, since turning the monitor does not change its panel. The picture only looks right when the orientation in your settings matches the turned screen.

Ranked monitors guides