Amazon Black Friday Week deals

Paid link

Monitors · How-to guide

How to Know If a Monitor Is VESA Compatible

We earn a commission when you buy through our links, at no extra cost to you. As an Amazon Associate I earn from qualifying purchases.
Short answer

A monitor is VESA compatible when the back has threaded holes in a square pattern for a VESA mount, arm, or wall bracket. Check the monitor manual or spec sheet for VESA mount support, then check the hole pattern and the mount fit before buying a mount. The mount must match the pattern on the back of your monitor.

  1. Look for VESA mount support

    Start with the monitor manual or spec sheet and look for VESA mount support. Look at the back of the monitor for threaded holes set in a square pattern, which is where a VESA mount attaches. The Acer KB242Y G0bi is VESA mountable, and the Sceptre E248W-FW100T has a VESA wall mount pattern. A standard VESA mount attaches to the threaded holes on the back of a monitor with VESA mount support.

  2. Measure the hole pattern

    Measure the distance between the holes on the back of the monitor, from the center of one hole to the center of the next hole. Compare that distance with the pattern size given for the mount, arm, or wall bracket you plan to use. The two must match, because a mount made for one pattern size does not fit a different pattern size. Write down the pattern size before you shop for a mount, so you can compare it with the mount details.

  3. Check the mount and the screws

    Check that the mount, arm, or wall bracket is made for the pattern size on your monitor and that it supports the weight of your monitor. Check the screws that come with the mount and the screw length the monitor manual calls for, because a screw that is too long can reach into the monitor. Tighten the screws by hand first, then tighten them with a tool as the mount instructions direct.

  4. Remove the stand before mounting

    Many monitors need the stand removed before a VESA mount can attach to the back. Check the monitor manual for the steps to remove the stand and for where the stand screws go. Keep the stand and its screws together in one place, so you can put the stand back on later. Lay the monitor face down on a soft, flat surface while you remove the stand and attach the mount.

What you need

Dell 24 Monitor SE2426H

Dell 24 Monitor SE2426H

A 23.8-inch 1920x1080 IPS monitor with a 144 Hz refresh rate, two HDMI ports and a tilt stand.

View on Amazon
Dell 27 Gaming Monitor SE2726HG

Dell 27 Gaming Monitor SE2726HG

A 27-inch 1920x1080 IPS monitor with a 240 Hz refresh rate, two HDMI ports and DisplayPort 1.4.

View on Amazon
Acer 23.8-inch Office Monitor KB242Y G0bi

Acer 23.8-inch Office Monitor KB242Y G0bi

A 23.8-inch 1920x1080 IPS monitor with a 120 Hz refresh rate, HDMI, VGA and a VESA mount.

View on Amazon
Sceptre 24-inch Gaming Monitor 1ms E248W-FW100T

Sceptre 24-inch Gaming Monitor 1ms E248W-FW100T

A 24-inch 1920x1080 monitor with a 100 Hz refresh rate, DisplayPort, two HDMI ports, built-in speakers and a VESA wall mount pattern.

View on Amazon

These come from our ranked list Best PC with Monitor, which compares them spec by spec.

FAQ

What does VESA compatible mean?

It means the back of the monitor has threaded holes in a square pattern for a VESA mount, arm, or wall bracket. The mount screws into those holes and holds the monitor on a desk arm or on a wall.

Do I need to remove the stand to mount a monitor?

Many monitors need the stand removed first, because the stand covers the holes on the back. Check the monitor manual for the steps to remove the stand, and keep the stand and its screws for later use.

How do I know a mount fits my monitor?

Compare the hole pattern on the back of your monitor with the pattern size given for the mount, and check that the mount supports the weight of your monitor. Both must match before you buy the mount.

Ranked monitors guides