How to Install USB-C on a Motherboard
To install USB-C on a motherboard, use a board that already has a USB-C port or a USB-C front-panel header, or add USB-C through an expansion card or a front-panel adapter that connects to a header on the board. Shut the PC down, unplug it and follow the maker's manual before you open the case.
Check what USB-C your board has
Look at the rear ports and the board manual for a USB-C port and a USB-C front-panel header. The Asus ROG Strix B550-F Gaming WiFi II has USB 3.2 Gen 2 Type-C, and the GIGABYTE B850 AORUS Elite WIFI7 has USB-C. A port name alone does not prove video output or charging, so check the manual for what that port supports and which header the case cable needs before you plan the connection.
Connect a front-panel USB-C cable
Find the USB-C header on the board from the manual, and match the keyed plug on the case cable to that header. Push the plug straight in until it sits fully, and do not force it if the key does not line up. Route the cable away from fans and sharp edges, then check that the plug is seated before you close the case and plug the PC back in.
Add USB-C with an expansion card
Fit an expansion card in a free PCIe slot to add a USB-C port to the board. Shut the PC down, unplug it, remove the matching slot cover from the case, and press the card into the slot until it is seated. Fasten the card bracket, connect any cable the card needs from the board or the power supply as its manual directs, then close the case and start the PC.
Install the drivers and check the port
After the PC starts, install the drivers from the board or card maker's site for your board model, and follow the maker's manual for any BIOS setting that controls the port. Plug in a USB-C device you already own and check that the PC sees it. If the device does not appear, shut the PC down, unplug it, check that the cable or card is seated, and try the device in another port.
Choose a board with USB-C built in
When you buy a board for a USB-C case or device, check the rear ports and the front-panel header in the manual first. The Asus ROG Strix B550-F Gaming WiFi II is an ATX board with DDR4 and USB 3.2 Gen 2 Type-C. The GIGABYTE B850 AORUS Elite WIFI7 is an ATX board with DDR5, PCIe 5.0 and USB-C. Match the socket and memory generation to the processor and memory you plan to use.
What you need

ASUS ROG Strix B550-F Gaming
An ATX board with USB 3.2 Gen 2 Type-C, HDMI 2.1, PCIe 4.0, Wi-Fi 6E and DDR4 support for AMD Ryzen 3000 and 5000 series processors.
View on Amazon
GIGABYTE B850 AORUS Elite WIFI7
An ATX board with USB-C, PCIe 5.0, DDR5, Wi-Fi 7 and 3 M.2 slots for AMD Ryzen 9000, 8000 and 7000 series processors.
View on Amazon
GIGABYTE B550M K
A Micro-ATX board with PCIe 4.0, DDR4 and USB 3.2 Gen 1 ports for AMD Ryzen 5000, 4000 and 3000 series processors.
View on Amazon
MSI PRO B760-P
An ATX board with USB 3.2 Gen2, PCIe 4.0, DDR4 and Wi-Fi 6E for 12th, 13th and 14th Gen Intel processors on LGA 1700.
View on AmazonThese come from our ranked list Best Motherboard, which compares them spec by spec.
FAQ
Can I add USB-C to a motherboard without a USB-C port?
Yes. Fit an expansion card in a free PCIe slot, or use a front-panel adapter that connects to a header on the board. Check the card or adapter manual for the slot and cables it needs.
Does a USB-C port on a motherboard carry video?
Not always. A port name does not prove video output, so check the board manual for DisplayPort Alt Mode, Thunderbolt or USB4 on that port before you connect a monitor.
Do I need to shut the PC down before installing USB-C?
Yes. Shut the PC down and unplug it before you open the case or fit a card, and follow the maker's manual. Contact the maker if the device is under warranty or you are unsure about opening it.



