Amazon Black Friday Week deals

Paid link

PC Components · How-to guide

How to Connect the Power Button on a Motherboard

We earn a commission when you buy through our links, at no extra cost to you. As an Amazon Associate I earn from qualifying purchases.
Short answer

The power button connects to the front panel header on the motherboard through a small cable from the case, labeled PWR SW. Find the header in the motherboard manual, line up the connector with the two pins marked for power, and push it on. Once it is seated, pressing the button on the case starts the PC.

  1. Shut down and unplug the PC

    Shut the PC down, switch off the power supply if it has a switch, and unplug the power cable from the wall. Wait a moment for any charge to clear, then open the case as your case manual shows. With the power cable unplugged from the wall, the board stays off while you reach the header.

  2. Find the front panel header

    The front panel header is a small row of pins along the bottom edge of the board, where the case buttons and lights connect. Your motherboard manual has a diagram that labels each pin, including the pair marked for power. Keep the manual open while you work so you match the connector to the right pins.

  3. Identify the PWR SW cable

    Look for the thin cable coming from the front of the case that runs from the power button to the board. It carries the signal from the power button on the case to the board. Other cables from the front of the case run to the reset button or the lights, so trace each cable to its button and set the power cable aside from the rest.

  4. Push the connector onto the power pins

    Line up the PWR SW plug with the two pins the manual marks for power and push it straight down until it sits flat. The power switch is a simple switch, so the plug works in either orientation. Check that it is fully seated and not touching the pins beside it before you move on.

  5. Press the power button

    Plug the power cable back in, switch the power supply on if it has a switch, and press the power button on the case. The fans should spin and the screen should show the startup screen. If nothing happens, unplug the PC again and check that the plug is on the power pins shown in the manual.

What you need

ASUS ROG Strix B550-F Gaming

ASUS ROG Strix B550-F Gaming

An ATX motherboard with an AM4 socket, B550 chipset, DDR4 memory, WiFi 6E and PCIe 4.0 for a Ryzen build.

View on Amazon
GIGABYTE B850 AORUS Elite WIFI7

GIGABYTE B850 AORUS Elite WIFI7

An ATX motherboard with an AM5 socket, B850 chipset, DDR5 memory, WiFi 7 and PCIe 5.0, covered by a 5-year warranty.

View on Amazon
GIGABYTE B550M K

GIGABYTE B550M K

A Micro-ATX motherboard with an AM4 socket, B550 chipset and DDR4 memory for a smaller Ryzen build.

View on Amazon
MSI PRO B760-P

MSI PRO B760-P

An ATX motherboard with an LGA 1700 socket, B760 chipset, DDR4 memory and WiFi 6E for an Intel build.

View on Amazon

These come from our ranked list Best Motherboard, which compares them spec by spec.

FAQ

Which way round does the PWR SW connector go?

Either way works. The power button is a simple switch, so the plug does not need a set orientation. If the button does nothing, check that the plug is on the power pins the manual shows.

Why does nothing happen when I press the power button?

The plug may be on the wrong pins, the power supply may be switched off, or the power cable may be loose. Unplug the PC, check the plug against the manual diagram, then plug the cable in firmly and switch the supply on.

Where is the front panel header on a motherboard?

It sits along the bottom edge of the board, in a small row of pins. The exact spot differs by board, so use the diagram in your motherboard manual to find it.

Ranked motherboards guides