How to Install Multiple Monitors on a Desktop
To install multiple monitors on a desktop computer, connect each monitor to a separate video output on the computer, such as HDMI or DisplayPort, then arrange the screens in the display settings. Most desktop graphics cards have several video outputs, so check the ports on the back of the computer before buying cables. The steps below walk through ports, cables, arrangement and common problems.
Check the video outputs on your desktop
Look at the back of the desktop for HDMI and DisplayPort outputs on the graphics card, and count how many monitors you want to connect. Each monitor needs its own output, so match the number of outputs to the number of screens. If the computer has only one output, a graphics card with more outputs or a USB video adapter adds the extra connections. Check the card's manual for how many displays it supports at once.
Connect each monitor with the right cable
Use an HDMI cable for an HDMI port and a DisplayPort cable for a DisplayPort port, and plug each monitor into a different output on the same graphics card. Push each connector in fully until it sits flat, and tighten the screws on a VGA or DVI connector where the cable has them. Turn the monitors on after the cables are connected, then turn the computer on so it can detect each screen.
Arrange the screens in display settings
Open the display settings on the computer and look for the diagram that shows the connected screens. Drag each screen in the diagram to match the order on the desk, then set one screen as the main display. Choose Extend for a separate desktop on each screen, or Duplicate to show the same picture on every screen. Apply the changes and keep them when the picture looks right.
Match resolution and refresh rate
Open the display settings for each monitor and set the resolution the monitor lists, such as 1920x1080, so text stays sharp. Set the refresh rate the monitor supports, such as 60 Hz, 120 Hz, 144 Hz or 240 Hz, and use the same refresh rate on matching monitors where the settings allow it. If a screen stays blank or flickers, try a different cable or a lower refresh rate, then check the connection again.
Fix a monitor that stays blank
Check that the monitor is on, the cable is fully plugged in at both ends, and the monitor is set to the input you used, such as HDMI or DisplayPort. Try another cable, another output on the graphics card, or another monitor to find the faulty part. If the computer was opened to fit a graphics card, shut it down, unplug it first, and follow the maker's manual before touching anything inside.
What you need

Dell 24 Monitor SE2426H
A 23.8-inch 1920x1080 IPS monitor with a 144 Hz refresh rate, two HDMI ports and a tilt stand.
View on Amazon
Dell 27 Gaming Monitor SE2726HG
A 27-inch 1920x1080 IPS monitor with a 240 Hz refresh rate, two HDMI ports and DisplayPort 1.4.
View on Amazon
Acer 23.8-inch Office Monitor KB242Y G0bi
A 23.8-inch 1920x1080 IPS monitor with a 120 Hz refresh rate, HDMI and VGA ports and a VESA mount.
View on Amazon
Sceptre 24-inch Gaming Monitor 1ms E248W-FW100T
A 24-inch 1920x1080 monitor with a 100 Hz refresh rate, two HDMI ports, DisplayPort and built-in speakers.
View on AmazonThese come from our ranked list Best PC with Monitor, which compares them spec by spec.
FAQ
How many monitors can a desktop computer run?
It depends on the video outputs on the graphics card and how many displays the card supports at once. Count the HDMI and DisplayPort outputs on the back of the computer, then match one output to each monitor.
Can I mix monitors of different sizes?
Yes. The display settings let you arrange screens of different sizes side by side, and each monitor keeps its own resolution. Place the main monitor in front of you and the second screen where it is easy to see.
Why does one monitor show no picture?
Check that the monitor is on, the cable is fully plugged in, and the monitor is set to the right input. Try a different cable or a different output on the graphics card, and check that the graphics card is seated and powered. Shut the computer down and unplug it before checking inside the case.



