How to Install a Monitor Wall Mount
To install a monitor wall mount, check the monitor's VESA pattern and weight, fix the wall plate to a stud, attach the VESA bracket to the back of the monitor, and hang the monitor on the plate. The Acer KB242Y G0bi and the Sceptre Prime are VESA mountable, so check the other two monitors in their manuals before you buy a mount.
Check the VESA pattern and weight
Look in the monitor's manual for its VESA pattern and compare it with the pattern on the mount. Check that the mount supports the monitor's weight: the Dell 24 Monitor weighs 7.43 lb, the Dell 27 240Hz Gaming Monitor weighs 8.2 lb, the Acer KB242Y G0bi weighs 7.72 lb, and the Sceptre Prime weighs 5.8 lb. Buy a mount only after both the pattern and the weight match.
Find a stud and mark the height
Hold the monitor at the height you want and mark where the top of the screen will sit. Use a stud finder to locate a stud behind that mark, and mark the stud's edges on the wall. Hold the wall plate against the mark and use a level to check that it sits straight. Mark the screw holes through the plate.
Attach the bracket to the monitor
Lay the monitor face down on a soft, flat surface and remove the stand if it is attached. Line up the VESA bracket with the mounting holes on the back of the monitor. Fit the screws that came with the mount and tighten them by hand, then give each one a firm final turn with a screwdriver. Do not force a screw that does not turn.
Hang the monitor and connect cables
Lift the monitor with both hands and hook the bracket onto the wall plate, then lock it in place as the mount's manual shows. Check that the monitor sits level and does not wobble when you let go. Connect an HDMI or DisplayPort cable from the monitor to your computer, then connect the power cable and switch the monitor on.
What you need

Dell 24 Monitor SE2426H
A 23.8-inch 1920x1080 IPS monitor at 144Hz with 2X HDMI, a 1ms response and a 7.43 lb weight.
View on Amazon
Dell 27 Gaming Monitor SE2726HG
A 27-inch 1920x1080 IPS monitor at 240Hz with 2X HDMI and DisplayPort 1.4, a 0.5ms response and an 8.2 lb weight.
View on Amazon
Acer 23.8-inch Office Monitor KB242Y G0bi
A 23.8-inch 1920x1080 IPS monitor at 120Hz with HDMI, VGA and a VESA mountable design, a 1ms response and a 7.72 lb weight.
View on Amazon
Sceptre 24-inch Gaming Monitor 1ms E248W-FW100T
A 24-inch 1920x1080 monitor at 100Hz with DisplayPort and HDMI x2, built-in speakers and a VESA wall mount pattern, at 5.8 lb.
View on AmazonThese come from our ranked list Best PC with Monitor, which compares them spec by spec.
FAQ
Do I need a wall stud to mount a monitor?
A stud gives a solid anchor for the wall plate. If you cannot hit a stud, follow the mount maker's instructions for the wall type you have and check the mount's weight limit against the monitor's weight.
How do I know if my monitor fits a wall mount?
Check the monitor's manual for its VESA pattern and compare it with the mount's pattern. The Acer KB242Y G0bi and the Sceptre Prime are VESA mountable, so check the other two monitors in their manuals.
What cables do I connect after mounting the monitor?
All four monitors here have HDMI, and the Dell 27 240Hz Gaming Monitor and the Sceptre Prime also have DisplayPort. Connect the cable that matches the port on your computer, then check that the picture shows on the monitor.



