Amazon Black Friday Week deals

Paid link

PC Components · How-to guide

Can You Mix Different Types of RAM?

We earn a commission when you buy through our links, at no extra cost to you. As an Amazon Associate I earn from qualifying purchases.
Short answer

No. DDR4 and DDR5 are different generations and do not fit the same slots, so a DDR4 kit and a DDR5 kit cannot run together in one PC. G.SKILL states that mixing memory kits will result in stability issues or system failure, so buy a matched kit instead of adding a second kit. Check your motherboard manual for the generation it accepts before buying.

  1. Check the generation your board takes

    A motherboard takes one generation of RAM. The DDR5 kits here are the Patriot Viper Venom, the CORSAIR Vengeance RS and the Corsair Vengeance RGB RS, all rated at 6000 MT/s. The G.SKILL RipjawsV kit is DDR4 rated at 3200 MT/s. A DDR4 kit and a DDR5 kit cannot share a board, so read the motherboard manual for the generation and slot type it accepts before you buy a second kit.

  2. Match the kit, not just the generation

    Two kits of the same generation can still differ in capacity, speed and timings. The Patriot kit is 16GB in two 8GB sticks at 6000MT/s with CL36 timings, the CORSAIR Vengeance RS is 32GB in two 16GB sticks at 6000MHz with CL38, and the Corsair Vengeance RGB RS is 64GB in two 32GB sticks at 6000MHz with CL40. The G.SKILL kit is 32GB in two 16GB sticks at 3200MT/s with CL16-18-18-38. Mixing kits with different figures can cause the stability issues G.SKILL warns about, so buy a matched kit when you add memory.

  3. Install the sticks in the right slots

    Shut down the PC and unplug it before you touch anything inside it, and follow the maker manual for your motherboard and case. Open the case, find the RAM slots on the motherboard, and press the clips at each end of a slot before you seat a stick. Push the stick straight down until the clips close around it. If you add a second kit, fill the slots the manual names for two kits, then switch the PC on and check that the system sees the full capacity.

  4. Turn on XMP or EXPO after installing

    New RAM boots at its JEDEC default speed until you turn on the rated profile. The Patriot kit supports Intel XMP and AMD EXPO, and both CORSAIR kits support AMD EXPO and Intel XMP 3.0. The G.SKILL kit includes a JEDEC default profile and an Intel XMP overclock profile. Open the BIOS, turn on the profile for your platform, and save the setting. The Corsair kits note that the maximum speed needs overclocking or BIOS adjustments.

What you need

Patriot Viper Venom DDR5 RAM

Patriot Viper Venom DDR5 RAM

A DDR5 kit with 16GB in two 8GB sticks at 6000MT/s, CL36 timings, 1.35V and support for Intel XMP and AMD EXPO.

View on Amazon
CORSAIR Vengeance RS DDR5

CORSAIR Vengeance RS DDR5

A DDR5 kit with 32GB in two 16GB sticks at up to 6000MHz, CL38, AMD EXPO and Intel XMP 3.0, with onboard voltage regulation.

View on Amazon
Corsair Vengeance RGB RS DDR5

Corsair Vengeance RGB RS DDR5

A DDR5 kit with 64GB in two 32GB sticks at up to 6000MHz, CL40, AMD EXPO and Intel XMP 3.0, with RGB lighting.

View on Amazon
G.SKILL RipjawsV DDR4 RAM (XMP)

G.SKILL RipjawsV DDR4 RAM (XMP)

A DDR4 kit with 32GB in two 16GB sticks at up to 3200MT/s, CL16-18-18-38, 1.35V, with a JEDEC default profile and Intel XMP.

View on Amazon

These come from our ranked list Best RAM for PC, which compares them spec by spec.

FAQ

Can I mix DDR4 and DDR5 RAM?

No. A motherboard takes one generation, so a DDR4 kit and a DDR5 kit cannot run in the same PC. Buy the generation your motherboard manual names.

Can I mix two kits of the same DDR5 generation?

No. The kits may differ in capacity, speed and timings, and G.SKILL states that mixing memory kits will result in stability issues or system failure. Memory kits are sold as matched kits designed to run together as a set.

Why does new RAM run slower than its rated speed?

Memory kits boot at the JEDEC default speed at default BIOS settings. Turn on the XMP or EXPO profile in the BIOS to run the kit at its rated speed. The maximum speed needs overclocking or BIOS adjustments.

Ranked memory (ram) guides