How to Connect a Motherboard
To connect a motherboard, mount it in the case, connect the power cables, then connect the front panel, storage, fan and USB cables to the headers the manual names. Shut the PC down and unplug it before you open the case, and follow the maker's manual for your board, since header layouts differ between boards.
Shut down and unplug the PC
Shut the PC down, switch off the power supply and unplug the power cable before you open the case. Keep the manual for your board nearby, since it shows where each header and connector sits. Work on a clear surface with the case on its side so the board sits flat. Touch a bare metal part of the case first to discharge static, and handle the board by its edges.
Mount the board in the case
Check that the case fits the board's form factor: the Asus ROG Strix B550-F, the GIGABYTE B850 AORUS Elite and the MSI PRO B760-P are ATX, while the GIGABYTE B550M K is Micro-ATX. Fit the board onto the standoffs in the case and fasten it with the screws the case provides. Do not force the board into place, and check that the rear ports line up with the opening in the case before you tighten anything.
Connect the power cables
Connect the main power cable from the power supply to the large power connector on the board, and connect the CPU power cable to the CPU power connector near the top of the board. The MSI PRO B760-P has 8-pin plus 4-pin CPU power connectors. Push each connector in until it seats fully, and check that the clip lines up with the tab on the socket. Follow the manual for your board if a connector does not fit, and do not force it.
Connect storage and expansion cards
Fit each M.2 drive into an M.2 slot and fasten it as the manual shows. The Asus ROG Strix B550-F has dual M.2 slots, the GIGABYTE B850 AORUS Elite has three M.2 slots, and the GIGABYTE B550M K has two M.2 slots. Seat an expansion card in the PCIe slot the manual names for it, and fasten the card bracket to the case. Check that each card sits fully in its slot before you close the case.
Connect the front panel and fans
Connect the front panel cables for the power button, reset button and case lights to the front panel header the manual shows, matching each plug to the pins the manual names. Connect each case fan to a fan header on the board, and connect the USB cables from the case to the USB headers. The Asus board lists USB 3.2 Gen 2 Type-C. The GIGABYTE B850 lists USB-C, so check which USB ports your case provides before you connect them.
What you need

ASUS ROG Strix B550-F Gaming
An ATX AM4 board with DDR4, PCIe 4.0, dual M.2 slots, USB 3.2 Gen 2 Type-C, HDMI 2.1 and WiFi 6E.
View on Amazon
GIGABYTE B850 AORUS Elite WIFI7
An ATX AM5 board with DDR5, PCIe 5.0, three M.2 slots, USB-C, WiFi 7 and a 5-year warranty.
View on Amazon
GIGABYTE B550M K
A Micro-ATX AM4 board with DDR4, PCIe 4.0, two M.2 slots and four USB 3.2 Gen 1 ports.
View on Amazon
MSI PRO B760-P
An ATX LGA 1700 board with DDR4, PCIe 4.0, M.2, USB 3.2 Gen 2, HDMI, WiFi 6E and 8-pin plus 4-pin CPU power connectors.
View on AmazonThese come from our ranked list Best Motherboard, which compares them spec by spec.
FAQ
Do I need to connect every cable on the motherboard?
No. Connect the power, front panel, storage, fan and USB cables your build uses, and leave unused headers empty. Check the manual for your board to see which headers each cable belongs to, and do not connect a cable to a header the manual does not name.
What if the PC does not start after connecting the board?
Check that the power cables are seated fully, the front panel cables match the manual, and the power supply is switched on and plugged in. Reseat any cable that feels loose, then check the manual for your board before you change anything else.
Can I use the motherboard's HDMI port for my monitor?
The Asus ROG Strix B550-F has HDMI 2.1 and DisplayPort 1.2 outputs. The MSI PRO B760-P has HDMI. Check the manual for your board to see which display output your build uses, and connect the monitor cable to that port.



