Amazon Black Friday Week deals

Paid link

Laptops · How-to guide

How to Clean a Laptop Charger

We earn a commission when you buy through our links, at no extra cost to you. As an Amazon Associate I earn from qualifying purchases.
Short answer

Unplug the charger from the wall and the laptop, then wipe the cable and power brick with a dry, soft cloth. For stuck grime, use a cloth barely damp with water, wipe again with a dry cloth, and let the charger dry fully before you plug it back in. Never submerge the charger or open the power brick.

  1. Unplug the charger first

    Pull the charger plug from the wall outlet, then pull the connector from the laptop. Let the charger sit until it feels cool to the touch, since a warm brick can hold heat after charging. Never wipe a charger that is still plugged in, and never pull the cable itself to unplug it; grip the plug and the connector instead.

  2. Wipe the cable and brick

    Run a dry, soft cloth along the cable from the brick to the connector, turning the cable as you go so you clean all sides. Wipe the brick the same way, including the edges where dust collects. For grime that does not come off dry, dampen the cloth with a little water, wring it out until it is barely damp, wipe the cable and brick, then wipe them dry with a second dry cloth.

  3. Clean the connector and the port

    Wipe the charger connector with a dry, soft cloth, and use a soft, dry brush to clear dust from its edges and from the laptop charging port. Look at the connector for bent parts or dirt stuck inside. Do not push anything metal or sharp into the connector or the port, and do not use water inside either one.

  4. Check the cable for damage

    Run your fingers lightly along the cable and look for cuts, fraying, exposed wires, kinks, or a loose connector. Check where the cable meets the brick and the connector, since those joints bend the most. If you find any damage, stop using the charger and contact the laptop maker. Do not open the power brick or try to repair the cable yourself.

  5. Let it dry before you plug it in

    Set the charger on a dry surface and leave it until every part feels dry, including the connector. Plug the charger into the wall outlet first, then connect it to the laptop. Check that the laptop shows it is charging, and if it does not, unplug the charger and check the connector and the port again.

What you need

Apple MacBook Air 13-inch Laptop

Apple MacBook Air 13-inch Laptop

A 13.6-inch laptop with a MagSafe charging port, so the charger to clean is the MagSafe cable and brick that connect to that port.

View on Amazon
Apple MacBook Neo 13-inch Laptop

Apple MacBook Neo 13-inch Laptop

A 13-inch laptop with up to 16 hours of battery life, so unplug its charger and let the laptop run on battery while the cable and brick dry.

View on Amazon
Dell 15.6 Laptop

Dell 15.6 Laptop

A 15.6-inch laptop with a backlit keyboard, so unplug its charger from the wall and the laptop, then wipe the cable and brick with a dry cloth.

View on Amazon
HP 17-inch Laptop

HP 17-inch Laptop

A 17.3-inch laptop with a full-size keyboard and numeric keypad, so move its charger to a clear surface before you wipe the cable, brick, and connector.

View on Amazon

These come from our ranked list Best Laptop, which compares them spec by spec.

FAQ

Can I use water to clean a laptop charger?

Yes, but only a cloth barely damp with water on the cable and brick, never on the connector. Wipe it dry right after and let the charger dry fully before you plug it in.

How do I clean the charger connector?

Wipe the connector with a dry, soft cloth and brush away dust with a soft, dry brush. Do not use water inside the connector, metal tools, or sharp objects.

What should I do if the charger cable is frayed?

Stop using it and do not try to repair it yourself. Contact the laptop maker for a replacement, since a damaged charger can be unsafe.

Ranked laptops guides