How to Clean Inside a Computer Screen
Clean the outside surface first, since most marks that look internal are dust or smudges on the outer layer. If a mark stays after careful outside cleaning, contact the maker instead of opening the display.
Shut down and unplug the display
Turn the computer off and unplug the monitor or laptop before you clean anything. Work with the screen cool and dark so marks show clearly against the surface. Keep liquids away from vents, ports, and the edges of the panel. Read the cleaning section in the maker manual for your exact model before you use any cloth or cleaner on the screen surface.
Check whether the mark is outside
Look at the screen at an angle under room light and note where the mark sits. Wipe a small area near the mark with a dry microfiber cloth and see whether the mark moves or fades. Display a plain light background and then a plain dark background to see whether the spot stays fixed in one place. A fixed spot that never changes with wiping points to a panel issue rather than surface dust.
Clean the outside surface
Use a clean, soft microfiber cloth and wipe with light pressure in straight passes. If dry wiping leaves smudges, dampen the cloth lightly with water and wring it out so it feels barely damp. Never spray liquid directly onto the screen, and never let liquid pool along the bottom edge or bezel. Avoid paper towels, rough cloths, and household glass cleaners unless the maker manual names them for your panel coating.
Know what not to open
Do not remove the bezel, pry at the panel edges, or open the display housing to reach dust behind the cover. The layers inside a screen are thin, bonded, and easy to damage, and opening the housing can void warranty coverage. Do not use compressed air inside vents or seams to chase internal dust. If the device is under warranty, stop at outside cleaning and contact the maker for service options.
Get help for true internal marks
Contact the maker or an authorized service provider if you see dust, moisture, insects, lines, or dark spots that remain after outside cleaning. Describe where the mark appears, whether it shows on light and dark backgrounds, and whether it changed over time. Ask whether the panel can be serviced or exchanged under your warranty terms. Keep the display unplugged and avoid pressing on the affected area while you wait for guidance.
What you need

Dell 24 Plus Monitor S2425HSM
A 23.8-inch FHD monitor with 144Hz refresh rate, HDMI connectivity, and height, tilt, pivot, and swivel adjustment for desk use.
View on Amazon
Dell 27 Plus Monitor S2725HSM
A 27-inch FHD monitor with 144Hz refresh rate, HDMI connectivity, and height, tilt, pivot, and swivel adjustment for desk use.
View on Amazon
Sceptre 27-inch Gaming Monitor 1ms E275W-FW100T
A 27-inch monitor with 100Hz refresh rate, two HDMI ports, one DisplayPort port, and VESA wall mount pattern.
View on Amazon
Samsung 24-inch Essential S3 (S36GD) 1800R Curved Computer Monitor
A 24-inch curved FHD monitor with 100Hz refresh rate, HDMI and D-sub ports, and Game Mode settings.
View on AmazonThese come from our ranked list Best Computer Monitor Screen, which compares them spec by spec.
FAQ
Can I open my monitor to clean inside it?
No. Keep the housing closed and clean only the outside surface. Opening a sealed display can damage the panel layers and void warranty coverage, so contact the maker for internal marks.
What cloth should I use on a computer screen?
Use a clean, soft microfiber cloth with light pressure. Dampen it lightly with water only if dry wiping leaves smudges, and never spray liquid directly onto the screen surface.
How can I tell dust from a panel fault?
Wipe the outside surface and view plain light and dark backgrounds. Surface dust moves or fades with wiping, while a fixed spot, line, or dark patch that stays in place points to a panel issue.




