Amazon Black Friday Week deals

Paid link

Monitors · How-to guide

How to Clean a Touch Screen Monitor

We earn a commission when you buy through our links, at no extra cost to you. As an Amazon Associate I earn from qualifying purchases.
Short answer

Turn the monitor off and unplug it before you clean the screen. Wipe the screen with a dry, soft, lint-free cloth to lift dust and fingerprints. For marks that stay, wipe with a cloth that is only lightly damp with water, then dry the screen with a second dry cloth before you switch the monitor on again.

  1. Turn the monitor off and unplug it

    Press the power button to turn the monitor off, then pull the power plug from the wall outlet. A dark screen shows dust and marks more clearly than a lit screen, and it stops touches on the screen from changing settings while you clean. Leave the monitor off until the screen is dry. If the monitor has a separate power brick, unplug that too and set the cables where they will not pull on the monitor.

  2. Wipe dust off with a dry cloth

    Use a soft, lint-free cloth and wipe the screen in straight lines from one side to the other. The dry cloth lifts dust and fingerprints without leaving water on the screen. Work across the whole screen, including the edges where dust gathers. Shake the cloth out away from the monitor if it picks up grit, so you do not drag grit back across the screen. Do not press hard, and do not use a rough cloth.

  3. Clean marks with a lightly damp cloth

    For marks that stay after a dry wipe, dampen a soft, lint-free cloth with a small amount of water and wring it out until it feels only lightly damp. Wipe the mark with light, straight strokes and let the cloth do the work. Dampen the cloth, not the screen, and keep water away from the edges, the ports and the stand. Never spray liquid straight onto the screen, and never pour water on it.

  4. Dry the screen before switching on

    Wipe the screen again with a second dry, soft, lint-free cloth until it feels dry to the touch. Check the screen in good light and wipe again if you still see streaks or damp patches. Leave the monitor off while the screen dries, and do not use heat to speed drying. Once the screen is dry, plug the monitor back in, switch it on, and check that touches on the screen work as they should.

  5. Follow the maker manual for your screen

    Some screens have a coating that the maker treats in a set way, so check the manual that came with your monitor before you use anything other than water. The manual also shows how to move the stand and how to reach the ports without pulling on the cables. If a mark will not lift with a damp cloth, or the screen does not respond to touch after cleaning, contact the maker instead of pressing harder or opening the monitor.

What you need

Dell 24 Plus Monitor S2425HSM

Dell 24 Plus Monitor S2425HSM

A standard 23.8-inch 1920x1080 monitor with a 144 Hz refresh rate, 1ms response, HDMI and two 3W speakers.

View on Amazon
Dell 27 Plus Monitor S2725HSM

Dell 27 Plus Monitor S2725HSM

A standard 27-inch 1920x1080 monitor with a 144 Hz refresh rate, 1ms response, HDMI and two 3W speakers.

View on Amazon
Sceptre 27-inch Gaming Monitor 1ms E275W-FW100T

Sceptre 27-inch Gaming Monitor 1ms E275W-FW100T

A standard 27-inch monitor with a 100 Hz refresh rate, 1ms response, DisplayPort, two HDMI ports and built-in speakers.

View on Amazon
Samsung 24-inch Essential S3 (S36GD) 1800R Curved Computer Monitor

Samsung 24-inch Essential S3 (S36GD) 1800R Curved Computer Monitor

A standard 24-inch curved FHD monitor with a 100 Hz refresh rate, HDMI and a D-sub port.

View on Amazon

These come from our ranked list Best Computer Monitor Screen, which compares them spec by spec.

FAQ

Can I use glass cleaner on a touch screen?

No. Wipe the screen with a dry cloth first, then use a cloth that is only lightly damp with water for marks that stay. Check the maker manual before you use any cleaner, and never spray liquid straight onto the screen.

Why does the screen still show marks after wiping?

Marks can stay when dust or finger grease needs more than a dry wipe. Wipe again with a cloth that is only lightly damp with water, then dry the screen at once with a second dry cloth. Check the screen in good light before you switch the monitor on.

Can I clean the screen while the monitor is on?

No. Turn the monitor off and unplug it first. A dark screen shows dust and marks more clearly, and touches on the screen will not change settings while you clean. Leave the monitor off until the screen is dry.

Ranked monitors guides