Amazon Black Friday Week deals

Paid link

Monitors · How-to guide

How to Check Your Monitor Setup

We earn a commission when you buy through our links, at no extra cost to you. As an Amazon Associate I earn from qualifying purchases.
Short answer

To check your monitor setup, confirm the cable and port in use, then open your display settings and verify the resolution, refresh rate, and display mode for the external screen. Check that the picture fills the screen, text looks sharp, and the monitor is set as the main display if you want it to be.

  1. Check the cable and port

    Look at the back of the monitor and note which input the cable uses, such as HDMI or DisplayPort. Make sure the cable is pushed in fully at the monitor and at the computer, and select that same input in the monitor menu. If you use USB-C, check that your laptop USB-C port supports video output in the manual or spec sheet. A USB-C port with video output support carries the picture to the monitor.

  2. Verify resolution in display settings

    Open the display settings on your computer and select the external monitor. Set the resolution to the native resolution for that monitor, such as 1920x1080 for a 1080p screen. If text looks stretched or blurry, the setting does not match the panel. Check the scale setting as well, and confirm the desktop fills the screen without dark bars on the sides or a cropped edge.

  3. Confirm the refresh rate setting

    Open the advanced display settings for the monitor and read the refresh rate shown there. Compare it with the native refresh rate for the monitor and select that rate if the menu offers it. The menu shows rates such as 60 Hz, 120 Hz, 144 Hz and 240 Hz. If that rate does not appear, try the other video port on the monitor and check the setting again.

  4. Check display mode and arrangement

    Select mirror or extend in display settings for the external monitor. Extend gives you separate space on the external screen, while mirror shows the same picture on the laptop screen and the external screen. Drag the screen icons in display settings so their order matches the order on your desk. Mark the monitor as the main display if you want new windows and the taskbar to open there first.

  5. Recheck after any change

    Repeat these checks after you swap a cable, move the monitor to a different port, or connect a different computer. Confirm the input shown in the monitor menu matches the cable in use, then read the resolution and refresh rate in display settings again. Open a document and a photo and look for sharp text, correct shapes, and a picture that fills the screen. Save the settings and restart the computer if the picture does not update.

What you need

Dell 24 Monitor SE2426H

Dell 24 Monitor SE2426H

A 23.8-inch IPS monitor with 1920x1080 resolution, a 144 Hz refresh rate, and HDMI inputs for a desk setup.

View on Amazon
Dell 27 Gaming Monitor SE2726HG

Dell 27 Gaming Monitor SE2726HG

A 27-inch IPS monitor with 1920x1080 resolution, a 240 Hz refresh rate, HDMI inputs, and a DisplayPort input.

View on Amazon
Acer 23.8-inch Office Monitor KB242Y G0bi

Acer 23.8-inch Office Monitor KB242Y G0bi

A 23.8-inch IPS monitor with 1920x1080 resolution, a 120 Hz refresh rate, and HDMI and VGA inputs.

View on Amazon
Sceptre 24-inch Gaming Monitor 1ms E248W-FW100T

Sceptre 24-inch Gaming Monitor 1ms E248W-FW100T

A 24-inch monitor with 1920x1080 resolution, a 100 Hz refresh rate, DisplayPort and HDMI inputs, and built-in speakers.

View on Amazon

These come from our ranked list Best PC with Monitor, which compares them spec by spec.

FAQ

Why does my monitor show a blank screen?

Check that the monitor is on and set to the input that matches your cable. Push the cable in fully at the monitor and at the computer. If you use USB-C, check that the laptop port supports video output, since a USB-C port can carry data without video.

Why does text look blurry on my monitor?

Text can look blurry when the resolution in display settings does not match the native resolution of the monitor. Select the monitor in display settings, set the resolution for that monitor, such as 1920x1080 for a 1080p screen, and check the scale setting.

How do I know which refresh rate is set?

Open the advanced display settings for the external monitor and read the refresh rate shown for that screen. Compare it with the native refresh rate for the monitor. If the two differ, select that rate in the menu and check the picture again.

Ranked monitors guides