Amazon Black Friday Week deals

Paid link

Monitors · How-to guide

How to Check Monitor Color Accuracy

We earn a commission when you buy through our links, at no extra cost to you. As an Amazon Associate I earn from qualifying purchases.
Short answer

Check monitor color accuracy by showing a reference image and comparing the colors on screen with the colors in the file, then confirm the result with a calibrator when the match matters for photo or print work. Warm the monitor up first, keep the room light steady and set the on-screen menu to its standard color mode. If the screen looks off, reset the color settings and compare again.

  1. Warm up the monitor and set the room light

    Turn the monitor on well before you judge color, so the backlight settles, and keep the room light steady while you work. Close blinds that throw direct sun on the screen, and keep lamps from shining straight at the panel. Sit square to the screen at your normal distance, since colors change when you view from a sharp angle.

  2. Open a reference image you trust

    Use a photo or a color chart file that you know well, one with skin tones, gray steps and strong reds, greens and blues. Open it full screen at the monitor's native resolution, such as 1920x1080, so the image is not stretched. Compare the grays first: they should look neutral, with no blue or yellow cast. Then look at the reds and greens for clipping or dull patches.

  3. Check the color mode and the sRGB setting

    Open the monitor's on-screen menu and look at the color preset. A standard or sRGB mode gives the closest match to web and photo colors, while vivid or gaming modes push saturation higher and hide the real picture. If the menu offers a color temperature, pick the daylight setting for photo work. Write down the preset you start from, so you can return to it after any change.

  4. Confirm with a calibrator for paid work

    A visual comparison shows big errors, but it cannot measure small ones. A hardware calibrator hangs on the screen, reads patches of color and builds a profile that the computer loads at startup. Use it when color decides whether a print matches or a client accepts a file. Recheck after any change to the monitor settings, the graphics driver or the room light.

What you need

Dell 24 Monitor SE2426H

Dell 24 Monitor SE2426H

A 23.8-inch IPS display at 1920x1080 and 144 Hz, with 2X HDMI and a tilt stand for a desk setup.

View on Amazon
Dell 27 Gaming Monitor SE2726HG

Dell 27 Gaming Monitor SE2726HG

A 27-inch IPS display at 1920x1080 and 240 Hz with 99% sRGB coverage, HDMI and DisplayPort 1.4.

View on Amazon
Acer 23.8-inch Office Monitor KB242Y G0bi

Acer 23.8-inch Office Monitor KB242Y G0bi

A 23.8-inch IPS display at 1920x1080 and 120 Hz with 99% sRGB, HDMI, VGA and a VESA mount.

View on Amazon
Sceptre 24-inch Gaming Monitor 1ms E248W-FW100T

Sceptre 24-inch Gaming Monitor 1ms E248W-FW100T

A 24-inch display at 1920x1080 and 100 Hz with 100% sRGB, DisplayPort, HDMI x2 and built-in speakers.

View on Amazon

These come from our ranked list Best PC with Monitor, which compares them spec by spec.

FAQ

Can I check color accuracy without a calibrator?

Yes, for a rough check. A reference image shows large shifts in gray balance and saturation, and the monitor's standard or sRGB preset gives a fair starting point. Small errors stay hidden without a measured profile, so use a calibrator when paid color work depends on the result.

Why do colors look different on two monitors?

Two monitors can show the same file in different colors because their color presets, brightness and white points differ, and room light hits the two screens in different ways. Match the presets, set the same color mode on both and compare them with the same reference image side by side.

How often should I recheck my monitor color?

Recheck whenever the picture looks different, after a settings reset, a driver update or a move to a new room. Watch for grays that drift toward blue or yellow and for skin tones that turn dull or orange, then repeat the reference image comparison.

Ranked monitors guides