How to Calibrate Multiple Monitors
Calibrating multiple monitors means adjusting each screen so the same image looks the same on all of them. Start by matching the brightness and color settings on each monitor, then use the color calibration tool built into Windows or macOS to fine-tune each screen one at a time.
Set up the monitors first
Place the monitors side by side at the same height and viewing distance, with the same light falling on each screen. Connect each monitor to the computer and set every screen to its native resolution, 1920x1080 for the monitors on this page. Let the monitors run for a while before you judge color, since a panel shifts as it warms.
Match brightness and color by hand
Open the on-screen menu on each monitor and set the same brightness, contrast, and color temperature on all of them. Turn off any eco mode or dynamic contrast setting, since those change the picture as the image changes. If one monitor has a color preset such as sRGB, set the others to the closest matching preset before you move on to software calibration.
Calibrate each screen with built-in tools
Windows has a Display Color Calibration tool and macOS has a Display Calibrator Assistant, and both walk you through gamma, brightness, contrast, and color balance one screen at a time. Run the tool on one monitor, save the profile it creates, then repeat the same steps on the next monitor. Keep the room light the same while you work so the results stay comparable.
Check the match and repeat as needed
Open the same photo on every screen and compare the whites, skin tones, and shadows side by side. If one monitor still looks warmer or brighter than the others, go back to its on-screen menu and nudge the brightness or color temperature until the screens agree. Recalibrate when you move a monitor, change the room lighting, or notice the screens drifting apart.
What you need

Dell 24 Monitor SE2426H
A 23.8-inch IPS monitor with a 1920x1080 display at 144Hz, 2 HDMI ports, and a tilt stand.
View on Amazon
Dell 27 Gaming Monitor SE2726HG
A 27-inch IPS monitor with a 1920x1080 display at 240Hz, 99% sRGB color coverage, 2 HDMI ports, and DisplayPort 1.4.
View on Amazon
Acer 23.8-inch Office Monitor KB242Y G0bi
A 23.8-inch IPS office monitor with a 1920x1080 display at 120Hz, sRGB 99%, HDMI and VGA ports, and a VESA mount.
View on Amazon
Sceptre 24-inch Gaming Monitor 1ms E248W-FW100T
A 24-inch monitor with a 1920x1080 display at 100Hz, 100% sRGB, DisplayPort and two HDMI ports, and built-in speakers.
View on AmazonThese come from our ranked list Best PC with Monitor, which compares them spec by spec.
FAQ
Do I need a colorimeter to calibrate two monitors?
No. The calibration tools built into Windows and macOS adjust gamma, brightness, contrast, and color balance on each screen, and matching the on-screen settings by hand gives a basic match. A colorimeter adds precision, but it is not required to make two screens look alike.
Why do my two monitors show different colors?
Each panel ships with its own brightness, color temperature, and preset, so two monitors show the same image differently until you match those settings. Different panel types and backlights also shift color, which is why calibration adjusts each screen on its own.
Should both monitors use the same resolution?
Yes, when the monitors support it. Set each screen to its native resolution, 1920x1080 for the monitors on this page, so each screen shows its sharpest picture and the calibration steps behave the same way on each screen. Note that the same resolution on a larger screen still makes text and images look bigger.



