How to Calibrate a Monitor Without Hardware
You can calibrate a monitor without a colorimeter by using the monitor's own on-screen menu, your operating system's built-in display tools, and a free reference image on screen. The goal is a picture where white looks white, black looks black, and skin tones look natural. The steps below take you through brightness, contrast, and color in order.
Let the monitor run and set the light
Turn the monitor on and let it run for a while before you change any setting, so the panel reaches its normal working state. Set the room light the way it is when you normally work, and close blinds or curtains if sunlight falls across the screen. A bright lamp behind you or a window behind the monitor makes the picture look darker than it is, so fix the light first and leave it alone while you work through the steps.
Reset the picture settings
Open the monitor's on-screen menu with the buttons on the monitor and look for a reset option. Resetting the picture settings clears any changes made before and gives you a clean starting point. Write down the settings you change as you go, so you can return to them if a later step makes the picture worse. Do not change settings in your graphics software yet; get the monitor itself right first.
Set brightness and contrast
Open a free grayscale reference image in your browser and look at the light and dark bars. Raise the brightness until the darkest bar is just visible against black, then lower it until the brightest bar still shows detail. Next, raise the contrast until white bars blend together, then lower it until each bar is distinct. Check the result with a photo you know well and adjust in small steps.
Adjust color in the menu
In the same on-screen menu, find the color settings and try the presets first, such as Warm, Cool, or Normal, and pick the one where white looks neutral instead of yellow or blue. If the menu offers red, green, and blue sliders, move one slider a small amount at a time and check the same reference image after each change. When skin tones in a photo look natural and gray bars show no color tint, stop and leave the settings alone.
Use the built-in display tools
Your operating system also has a display calibration assistant that walks you through brightness, contrast, and color with sample images. Run it after the monitor menu steps, since it builds on the settings you already set. Answer each prompt by matching the sample on screen, and save the profile it creates at the end. If the result looks worse than before, run the assistant again from the monitor defaults.
Save the settings and recheck
Save the settings as a preset in the monitor menu if your monitor offers one, so a later change is easy to undo. Recheck the picture when the room light changes, such as in the evening, and adjust only the brightness for the new light. If the picture drifts after a driver update or a new cable, work through the steps again from the reset.
What you need

Dell 24 Monitor SE2426H
A 23.8-inch FHD IPS monitor at 144Hz with a 178° viewing angle, 1ms MPRT, and two HDMI ports.
View on Amazon
Dell 27 Gaming Monitor SE2726HG
A 27-inch FHD IPS monitor at 240Hz with 99% sRGB coverage, DisplayPort 1.4, and two HDMI ports.
View on Amazon
Acer 23.8-inch Office Monitor KB242Y G0bi
A 23.8-inch FHD IPS monitor at 120Hz with 99% sRGB coverage, AdaptiveSync, HDMI, and VGA inputs.
View on Amazon
Sceptre 24-inch Gaming Monitor 1ms E248W-FW100T
A 24-inch FHD monitor at 100Hz with 100% sRGB coverage, DisplayPort, two HDMI ports, and built-in speakers.
View on AmazonThese come from our ranked list Best PC with Monitor, which compares them spec by spec.
FAQ
Can I calibrate a monitor with no tools at all?
Yes. The monitor's on-screen menu and your operating system's display calibration assistant give you the controls you need, and a free reference image on screen shows you what changes. The result is not as exact as a hardware colorimeter, but it is a clear improvement over factory settings.
How often should I calibrate my monitor?
Recheck the picture when the room light changes or after a driver update, a new cable, or a reset of the monitor. Watch for whites that look yellow or blue, grays with a color tint, and photos where skin tones look wrong, then work through the steps again.
Why does my monitor look different from my laptop screen?
Two screens rarely share the same panel, backlight, and color settings, so the same image looks different on each one. Match the brightness and the color preset on the monitor to the laptop screen, then check both with the same photo.



